Penta

Heavy duty replacement jack

-Axle Hub
-10 Bolt
-#16,000 weight capacity
-TMR Spindle Hub
-PTA2050

– Standard Triangle TMR mixer blade compatible
– Heat Treated
– Vertical TMR Mixer
– Feed Wagon

– Heat Treated
– Fits to Penta, Kirby TMR Mixer Brands
– 3/8″ thick
– Optional mounting holes
– Curved one side for more aggressive feed cutting

Replacement auger leading edge parts in stock

Feed restricter adjustable plate

New, LOW COST, Quality tires IN STOCK in several different sizes

Penta Verticals

Penta SD and HD Vertical Mixers

Heavy duty replacement rims at Post Equipment IN STOCK

NEW, triple axle, led work lights, rear hitch

NEW, led lights, triple axle

NEW triple axle, front and rear steer, led work lights

NEW! triple axle, front and rear steer, led work lights

• Triangle Knife Backing Plate
• Beveled Edge
• Threaded Tip Bolt Hole
• Mild Steel
• 3/4″ Thick
• Fits to Vertical TMR Auger Mixer Wagons

– Kuhn Knight Replacement Magnet Part
– Magnet Tray Replacement Part
– 4 Auger Tip Tray Replacement Magnet
– Supreme Replacement Slide Tray Magnet
– Bolt In
– Replacement Magnet
– 18″ Magnet
– Reel Auger TMR Mixers
– Vertical TMR Mixers
– Rotomix TMR Mixer Slide Trays

– Spindle Not Included
– Spindle Nut Not Included
– 12,000lb Capacity
– TMR Mixer Hub
– 8 Bolt
– Complete Assembly

• Penta, Kuhn Knight, RotoMix, Farm Aid, NDE, Trioliet Replacement Magnet Part
• Magnet Tray Replacement Part
• Supreme Replacement Slide Tray Magnet
• Bolt In
• Replacement Magnet
• 17.5″ Magnet
• Reel Auger TMR Mixers
• Vertical TMR Mixers”

– Standard Curved Knife
– Heat Treated
– Hardened

-TMR Feed Mixer Spindle
-#16,000
-4″x23″
-PTA2051

Used Penta 1120-HD Vertical Feed Mixer! Dual flat discharge, tandem axle, super single tires, 2 speed gear box, clevis hitch, small 1000 PTO, Digi-Star scale head! New discharge chain, new augers and knives, just serviced and gone through in the shop and ready to go!

Used Penta 7520 Vertical Feed Mixer! Completely rebuilt mixer! Single axle with duals, RH 3 foot discharge, rubber tub extension, light kit, rear commodity door, Digi-Star scale head with RH remote read out, small 1000 PTO! New augers and knives, new stainless steel wall liners, new stainless steel floor liners, discharge was rebuild with a new chain, freshly repainted! Ready to go!

Used Penta 9630 Vertical Feed Mixer! Flat dual discharge, tandem axle with super single tires, rear commodity door, light kit, 9″ rubber tub extension, augers are 60% or so with good knives, stainless steel over the baffles, 2 speed gear box, small 1000 PTO, Weigh-Tronix scale head! Ready to go!

Used Penta 1720 Vertical Feed Mixer! Triple axle, triple auger, front door with dual flat discharge, rear commodity door, dual side doors, new augers and knives! Large 1000 CV PTO, two speed gear box, rubber tub extension, clevis hitch, Digi-Star scale head! Ready to go!

Used Penta 1720 Vertical Feed Mixer! One owner trade! Triple axel with ok tires, triple screw, augers are ok, knives are ok. Dual side doors, rear commodity door, front RH corner door, back LH corner door. No scale head (But our parts department has plenty), large 1000 PTO, bull pull hitch, rubber tub extension, two speed gear box. Everything functions as it should but wagon will be sold as is. Ready to go!

Used Penta 1130 Vertical Feed Mixer! Tandem axel with super single tires, front right hand corner door with magnet tip off, rear commodity door, good augers and knives, two speed transmission! Digi-Star scale head, large 1000 CV PTO, rear light kit, rubber tub extension! Ready to go!

***NEW*** Penta 6740 Vertical Feed Mixer! Single axel with 445-45R19.5 tires, right hand 4′ flip up weighing conveyer discharge, twin augers with knives! 540 CV PTO, rubber tub extension, light kit, rear commodity door, Digi-Star scale head! Ready to go!

Used Penta 5030 Vertical Feed Mixer!  Was rebuilt and repainted in the fall of 2024! Single heavy duty axel with super single tires, left hand 3′ flip up discharge with magnet tip off and feed back stop, good auger, good knives, 540 CV PTO, Digi-star scale head with left hand remote readout! Ready to go!

Used Penta 6730 Vertical Feed Mixer! Single axel with super single tires, left hand 4′ discharge with magnet back stop and tip off, new stainless steel tub liners, new augers and knives! Two speed gear box, small 1000 CV PTO, Digi-Star scale head with remote read out, light kit, rubber tub extension! Ready to go!

***NEW*** Penta 4540 Vertical Feed Mixer! New 40 series from Penta! Single axle with super single tires, 9″ rubber extension, 3′ right hand flip up, weighing conveyer! Digi-Star EZ2800 scale head, 540 CV PTO, light kit, single auger with auger magnet and knives! Ready to go!

Used Penta 5020 Vertical Mixer Wagon! New auger and knives, stainless steel liner, single axle, right hand flip up discharge with magnets, rubber extension, new Point scale, small 1000 CV PTO! Ready to go!

✔ Inspected, cleaned and serviced
✔ Ready to work
✔ Nationwide shipping available
✔ 60-Day Warranty

Used Penta 1720HD Vertical Feed Mixer!  Has 3′ RH flip up, triple auger, triple axle, side doors, rear commodity door, rear light kit, and large 1000 CV PTO with 2-Speed. Coming Soon!

***Consigned*** Penta 4020 Vertical Feed Mixer! Single axle with super single tires, left hand 3′ flip up with magnet tip off, auger is 50% or so! Comes with two 540 PTO’s, light kit, rubber tub extension is new, Digi-Star scale head! Unit has been through our shop! Ready to go!

Used Penta 4030 Vertical Feed Mixer! Has RH Flip-up Discharge.  Is a 3 year old mixer. Coming Soon!

***NEW** Penta 4040 vertical feed mixer! This mixer is equipped with a 3′ right hand flip up discharge and weighing conveyor. It also has an EZ2800 bluetooth scale head, light kit, 445/45R19.5 super single tires, and a 9″ rubber extension. Powered by a 540 CV PTO.

✔ Inspected, cleaned and serviced
✔ Ready to work
✔ 60-Day Warranty
✔ Nationwide shipping – Call for a quote!
✔ For sale at Post Equipment in Rock Valley, IA

***New*** Penta 5240 Vertical Feed Mixer

***New*** Penta 5040 Vertical Feed Mixer! Coming Soon!

***New*** Penta 5040 Vertical Feed Mixer! Coming Soon!

***NEW** Penta 4040 vertical feed mixer! This mixer is equipped with a 3′ right hand flip up discharge and weighing conveyor. It also has an EZ2800 bluetooth scale head, light kit, 445/45R19.5 super single tires, and a 9″ rubber extension. Powered by a 540 CV PTO.

✔ Inspected, cleaned and serviced
✔ Ready to work
✔ 60-Day Warranty
✔ Nationwide shipping – Call for a quote!
✔ For sale at Post Equipment in Rock Valley, IA

***NEW** Penta 5240 vertical feed mixer! This mixer is equipped with a 3′ right hand flip up discharge and weighing conveyor. It also has an EZ2800 bluetooth scale head, light kit, 445/45R19.5 super single tires, and a 9″ rubber extension. Powered by a 540 CV PTO.

✔ Inspected, cleaned and serviced
✔ Ready to work
✔ 60-Day Warranty
✔ Nationwide shipping – Call for a quote!
✔ For sale at Post Equipment in Rock Valley, IA

Used Penta 6730 Vertical Feed Mixer! Has tandem axle, CV PTO, no 2 speed, 3 foot right hand flip up, Digi-Star scale, and 16″ rubber tub ext. Coming Soon!