Supreme

NEW!! feed lot augers with hard weld, dog leg right hand discharge, cv pto, light kit, 10″ rubber ext.

NEW !!!!! feed lot augers that are hard welded, single axle with duals, 10″ rubber ext., tail light kit, right hand dogleg discharge

**NEW** Supreme 600T 2021 Freightliner Truck Mount! Feedlot augers, front door w/SS wall liners, 8′ conveyor, LH dogleg discharge, magtray, Digi-Star EZ 2500V in cab, RD 2500V LH remote, RD 440 mirror mount remote, 10″ rubber extension, Cummins engine, Allison transmission, 11R22.5 tires, 600 cu.ft. Very sharp unit!

*NEW* Supreme 700T vertical mixer, cutting augers with knives, flat right hand discharge, single axle, rubber extension, Digi-Star 2500 scale head, small 1000 CV PTO

*NEW* Supreme 900T vertical mixer, right hand dogleg discharge with backstop and magnets, 2 hyd. remotes needed, feedlot augers, single axle with duals, Digi-Star scale, small 1000 CV PTO

**NEW** tandem axle, super single tires, flip up rh discharge, light kit, rear comm door, remote and scale head,

feedlot augers with knives are 95% will have new stainless liners and new paint

Supreme, TMR, Vertical Mixer, Conveyor Drive Bearing, 1-1/4″ Bore, 4 Bolt,  W/ Set Screws

• Spread Tooth
• Bent Steel
• Left hand
• AR400
• Vertical Beaters
• Vertical Spinners
• Manure Spreader
• 1/2″ Thick
• Compatible with JBS, MEYER’S, RODA, HAAGEDOORN, ARTEX

– Standard Triangle TMR mixer blade compatible
– Heat Treated
– Hardware included
– Vertical TMR Mixer
– Feed Wagon

**REBUILT** new feedlot augers and knives, small 1000 pto, weightronix scale,single axle duals, RH dogleg conveyor NICE!! SN: 090516

gen 2 truck , repto, very nice looking truck

• Penta, Kuhn Knight, RotoMix, Farm Aid, NDE, Trioliet Replacement Magnet Part
• Magnet Tray Replacement Part
• Supreme Replacement Slide Tray Magnet
• Bolt In
• Replacement Magnet
• 17.5″ Magnet
• Reel Auger TMR Mixers
• Vertical TMR Mixers”

– Kuhn Knight Replacement Magnet Part
– Magnet Tray Replacement Part
– 4 Auger Tip Tray Replacement Magnet
– Supreme Replacement Slide Tray Magnet
– Bolt In
– Replacement Magnet
– 18″ Magnet
– Reel Auger TMR Mixers
– Vertical TMR Mixers
– Rotomix TMR Mixer Slide Trays

NEW Supreme 1200T Vertical Mixer Wagon, cutting augers with knives, tandem axle with 11R22.5 dual tires, front left side door, front right side door, rear commodity door, 10″ rubber extension, Digi-+Star 2500 scale head, large 1000 CV PTO. Coming in!

***NEW*** Cutting Augers, large 1000 CV PTO, walking tandem axle with 11R22.5 tires, front door, 10′ right hand dogleg conveyor, hydraulic extender kit, tail light kit, 10′ rubber extension, Digi-Star 2500 scale head.

***NEW*** Cutting augers, small 1000 CV PTO, single axle with 385/65R-22.5 tires, front door with 8′ right hand dogleg conveyor, hydraulic extender kit, tail light kit, 10″ rubber extension, Digi-Star 2500 scale head. Coming in August 2021.

***NEW*** Feedlot augers, small 1000 CV PTO, 8′ left hand dogleg conveyor, hydraulic extender kit, conveyor motor plumbed in extender cylinder, tail light kit, 10″ rubber extension, Digi-Star 2500 scale head

NEW Supreme 900T Vertical Mixer Wagon, cutting augers with knives, small 1000 CV PTO, single axle with 11R22.5 duals, front door with 10′ right hand dogleg discharge with hyd. extender, rear light kit, 10″ rubber extension, Digi-Star 2500 scale head. Coming in August 2021

NEW Supreme 900T Vertical Mixer Wagon, feedlot augers, small 1000 CV PTO, single axle with 11R22.5 duals, front door with left hand dogleg discharge with hyd. extender, rear light kit, 10″ rubber extension, Digi-Star 2500 scale head. Coming in!

NEW!! Segue 6T vertical mixer comparable to the Supreme 600T. This is a Supreme line with some things not as expensive on it, still the same fast mixing and processing! RH dogleg discharge, feedlot augers, small 1000 cv pto, 385/65R22.5RT tires, single axle, front door, Digistar EZ2500V scale, 635 cu.ft, SN: 2SEG6T021F.

– 6 Tooth Sprocket
– 2082H Chain Application
– 1-1/4″ Bore
– Replacement TMR Part
– Fits to All Supreme Conveyor Assemblies
– woodruff key not included

**NEW** 10′ Right hand dog leg conveyor, feedlot augers, single axle with dual 11R22.5 tires, Digistar scale system, 10″ rubber extension, taillights, SN:190156F

cutting augers, hardwelded augers baffles and doors, single axle, 10″ rubber ext

cutting augers, harwelded augers and baffles and doors, 10″ rubber ext. single axle

2010 model, Twin side doors and rear commodity door, twin augers w/knives at about 40%-50% or so, good wall liners, single axle w/11R22.5 duals, Digi-Star EZ 2500V scale head, small 1000 pto, 1000 cu.ft., SN: 1100020.

2010 model, Nice big wagon for stock cows and high roughage rations!! Sports twin side discharge doors and a rear commodity door, twin augers at about 50% or so, good cutting knives, single axle w/11R22.5 dual tires, brand new Digi-Star EZ 2500V scale, small 1000 pto, 1000 cu.ft., SN: 1100030. Give us a call!

**Rebuilt**Supreme 1000T! New 5/8″ hard-welded cutting augers, new knives, new 50″SS liners, RH dogleg, new conveyor chain, new 2-speed gear box put on1 yr. ago, large 1000 cv pto, Dinamica Generale scale, SN: 1100024A40.

***NEW***Feed lot augers in it now can replace with cutting augers if needed, 10 ” rubber extension, dogleg conveyor, hydraulic flip up with magnets, 2 speed clean out, stainless wall liners, mounted on 2019 Peterbilt truck, 2 camera system, custom HD bumper with roller, aluminum rims, Digi-Star scale with remote on left hand side of tub, SN: 1TM12058F

feedlot augers, flat discharge with flip up magnet, tandem axle truck

***New*** Cutting augers, small 1000 CV PTO, tandem axle with 11R 22.5 tires, right hand dogleg discharge with hydraulic extender, light kit, 10 inch rubber extension, Digi-Star 2500 scale, 1200 cu. ft. capacity, SN: 1120598.

***NEW*** Feedlot augers, rear engine PTO, 2 speed clean-out, front door, 8′ LH dogleg conveyor, flip up mag tray, 10″ rubber extension, Stainless Steel Liners!! 2 camera system, mounted on a 2021 Peterbilt 567, SN: 2TM12030. Immaculate machine!! Call Chad or Dan to check it out!

2007 model, RH dogleg discharge, cutting augers @ 50%, New paint, new auger caps, new plow blades, new knives, new Digi-Star scale, good liners, single axle, 2 speed gearbox. Sharp wagon!! SN: 0120287

**REBUILT** New cutting augers with knives, new Stainless steel liners, flat conveyor, rear commodity door, tandem axle, Digi-Star 2500 scale, rebuilt and ready to go! SN: 1120340

Used 4 years, rear commodity door, 2 side doors, tandem axle with duals, all new planetary oil, new auger caps, augers are good, new knives, Digi-Star 2500V scale, large 1000 SN: 1120093

NEW stainless steel liners! New knives, 2011 model, 2 side doors & rear commodity door, light kit, tandem axle, rubber extension, Digistar scale, large 1000 CV PTO, nice big mixer wagon! SN: 1120351

**NEW** flat dual discharge, rubber ext. cutting augers, rear comm. Door, dual tires cv pto

*REBUILT* Side doors, rear commodity door, new cutting augers are hard welded, all new SS liners, new Weightronix 640 scale, new planetary oil, all checked over and ready to go! SN:1120202

**NEW** side doors, rear comm. Door

**NEW** RH door and lh door front discharge, and rear commodity door, digistar weigh bars

1 year warranty on both planetaries! Used one owner local trade, light kit, tandem axles with duals, front side doors on both sides, rear commodity door, hardwelded augers. Digi-Star scale, SN:1120294

used one owner, flat dual discharge, rear door, will have new augers liners and paint, tandem axle

front right hand side door and front left hand side door

rear commodity door

SN: 1120578

2016 Model, new Digi-Star 2500 scale head, new dual tire and rim assemblies, tandem axle, cutting augers with new hard weld and new plow blades, liners are good at 1/8″, dual front discharge doors, rear commodity door, large 1000 CV PTO, SN: 1120166.  There will not be a warranty on the planetary’s.

NEW! Front dual side doors, rear commodity door, light kit

Used, one owner local trade, 2016 model, dual front side doors and rear commodity door, augers are 80% with new knives, augers have been hard welded, liners range from 5/32-7/32″, tandem axle with dual tires, light kit, 1200 cu.ft, Digi-Star 2500 scale, large 1000 CV PTO, SN: 1120226.  Nice Looking Wagon!

NEW! dual front side doors, 10″ rubber ext., rear commodity door, duals tandem axle,

Complete Rebuild!  One owner local trade, 2015 model, new cutting augers with hard weld and new knives, new 50″ stainless steel liners, dual side doors and rear commodity door, tandem axle with dual 275/70 R22.5 tires, 10″ rubber extension, 1200 cu.ft., Digi-Star 2500 scale, large 1000 CV PTO, SN: 1120035

+

Rebuilt and repainted 2008! Right hand dogleg conveyor, rear commodity door, augers around 80% or so, SS liners, new knives, new paint-job, single axle, 11R 22.5 duals, large 1000 pto, Digi-Star EZ 2500V scale, 1072 cu. ft., SN: 0120038.

NEW!! tandem axle, dual side doors, rear door, no lights

2017 model, dual side doors, commodity door, nice hard-welded augers, good knives, new rubber extension, tandem axle, 275/70R22  duals, large 1000 cv pto, Digi-Star EZ 2500V scale, 1072 cu. ft., SN: 1120307. Nice big wagon! Call Chad or Dan for more info!

NEW ! stainless wall and floor liners, tandem axle, light kit, hydrualic extender, flat dual discharge, conveyor swing gate, cv pto, 10″ rubber ext. tail light kit

NEW ! tandem axle, flat dual discharge, cv pto, 5 knives per screw, 10″ inch rubber ext.,

NEW! Walking tandem axle, super single tires, dog leg right hand sliding discharge, 10 inch rubber extension

NEW! feed lot augers hard welded, stainless steel wall liners, tandem axle, left hand discharge

hard welded feedlot augers, stainless steel wall liners, left hand dogleg discharge, duals tandem axle, nice wagon 5 years old. Coming in October.

dog leg discharge, rh, hyd extender, cv pto ,10 inch rubber, tail lights

NEW ! GEN 3!! 8 foot dogleg conveyor with flip up with magnets, stainless liners, feedlot augers, 2500 head and remote and mirror mount call us for more details !!

NEW! Gen 3 truck mount mixer, dogleg discharge with flip and magnets, stainless liner

used truck 22,000 hours, feedlot augers are 70 percent, stainless wall liners conveyor is near new

**NEW** 8 foot flat conveyor, flip up with magnets, feed lot augers hard welded, 10″ rubber ext., 2 speed clean out, rear comm. Door,

**NEW** feedlot augers

Flat discharge, 2 speed clean out,

NEW! Front Engine PTO drive, stainless steel wall liners, 8 foot sliding discharge

New feed lot augers with new hard weld, stainless liners, front door and rear door, left hand flat discharge,  rear camera, in cab controller for discharge chain speed, heavy duty custom built bumper, scoreboard remote displays on both sides of the box, truck is a 2015 with 13,000 hours on it.  SN:1TM14045

NEW

NEW ! 1400t truck mount with stainless wall liners

**NEW** cutting augers, big 1000 cv pto, 10″ rubber ext., flat dual discharge,

dual conveyor, drop chute with magnets, cv pto, rear commodity door, 50″ stainless liners

***Rebuilt & repainted*** Supreme 1400T! Right hand 10′ dogleg w/new shields and conveyor chain, new hard-welded feedlot augers, new caps, new SS liners, large 1000 cv pto, both planetary’s have been gone through and have a 1 year PEC warranty!  SN: 1140070F.

2018 Peterbilt 367 truck with a 1400T Supreme vertical mixer mounted on it, Stainless steel liners are in good shape, feedlot augers are around 40 percent, Front Engine Pto set up, truck has a cummins motor in it with a 4500 allison transmission with a drop box for slower speeds, truck is set up right and well maintained!

new back tires, new feed lot augers, new flat conveyor,

NEW ! Triple screw! front dual side doors, tandem axle, no rubber ext

**NEW** triple screw, stainless liners,10″ tub ext.,tandem axle, 2 speed trans

NEW ! 4 side doors, 11 r 22.5 tires, tandem axle, rd 4000 remote, 3610 scale head, tail lights, 10 inch rubber ext. 12 gauge ss wall liners

Used, 1 owner local trade, triple screw, front flat dual conveyor, rear commodity door, rd 4000 remote and 3610 scale head, stainless steel wall liners, augers are 50 to 60% or so, very nice looking wagon !

dual side doors, rear commodity door, triple auger, light kit, cv pto, ss wall liners

RH side door with chain conveyor, auger is very good-70% or so, all new knives & bolts, liners are good, new planetary oil, small 1000 non-CV PTO, Digistar scale. Excellent shape! SN: 030163

2009 model rebuilt!! Brand new left-hand discharge, new auger and knives, new liners and plow blade, single axle, good 19.0/45-17 tires, small 1000 pto, Dinamica Generale Stad 04 Plus scale, 378 cu.ft. capacity, SN: 040109. Great wagon for stock cows or beef cattle!!

2009 model, right hand 3 ft. flip down discharge w/ tip off and magnet, brand new auger and new knives, new liners, single axle w/ good tires, Dinamica Generale Stad 04 Plug scale, 540 PTO. Good wagon!

Used Supreme 400 Vertical Mixer, Fixed LH 3ft. conveyor discharge, single auger at 50% or so, cutting knives, new plow blade, 19.0/45-17 tires, 540 pto, Digi-Star EZ 2000V, 400 cu.f.t, SN: 040385.

*REBUILT* Brand new cutting auger and liners! Knives are in great shape, sliding right hand dogleg discharge, new planetary oil, Digistar scale, small 1000 PTO, nice smaller vertical mixer! SN: 050035

2002 model, RH dogleg discharge, new liners installed, new 5/8″ auger flighting, new knives, 500 CU capacity. Digi-Star EZ 2400 scale, small 1000 PTO, SN: 95031. Come check it out!

right hand dogleg discharge, good augers knives and liners

**NEW** feedlot augers, single axle, rh flip up conveyor, light kit, cv pto small 1000 rpm, digi star scale

Right hand angle conveyor, auger is 50-60%, knives are in good shape, new planetary, 540 PTO, Digistar scale SN: 10016

knives and auger are 90%, dogleg conveyor, small 1000 PTO, very nice original mixer!!

New angle discharge conveyor and chain (right hand), new dual 12.5L-16SL implement tires and rims, auger is 80% or so, knives are good, liners are 1/4″, new planetary and T-Box oil, 540 PTO, Digi-Star EZ 150 scale, 500 cu.ft., SN: 950246

New knives, new plow blade, new planitary and T-box oil, new right hand 8ft dogleg conveyer discharge, Digi-Star EZ 210 scale, very mechanically sound mixer.

**REBUILT** new auger is AR200 steel! New stainless steel liners! New Paint! New planetary oil, single ax with duals, RH discharge door with slide tray, (other discharge options available) Digi-Star scale. 540 PTO, SN: 950185

New Stainless Steel Liners, New Auger, New Knives, Fresh Paint and Decals, Dinamica Generale scale, Duals, Left Hand Dogleg Discharge, SN: 050077, 540 PTO, Very Nice Wagon!

Supreme 500S Vertical Mixer Wagon, left hand dogleg discharge, augers are 60% or so, good knives, coming in!

**REBUILT** New cutting augers, new knives available, all new liners, right hand dogleg conveyor with rebuilt floor, all new planetary oil, 10″ rubber extension, Digistar scale system, ready to go!

Used 2013 model, good feedlot augers, good liners, sliding right hand dogleg discharge, new planetary oil, Digi-Star scale SN:15T0303F

2012 model, good cutting augers with new knives, sliding RH dogleg discharge, all new planetary oil, 385 tires, Digi-Star scale with remote, nice condition SN:15T0032

feedlot augers, light kit, sliding right hand dog leg discharge, 385 tires, Digi-Star EZ2500v scale, small 1000 PTO, SN:15t0303F, Nice Wagon!

New stainless steel liners and floor liner, new augers w/ new knives, RH dogleg discharge, Digi-Star EZ 2500V scale w/ remote on LH side of wagon, small 1000 CV PTO, SN: 15T0032. Nice wagon ready to go!

NEW! 10 inch tub extension, 1000 rpm, rh discharge,

dogleg discharge, single screw, kniver are good, scale, new oil in planetary,540 rpm

One owner local trade, left hand dogleg discharge, scale head and remote, new liners, new knives & new paint!

2006 model, front corner door mixer, right-hand incline discharge to reach bunk height, single auger that is nearly new, knives are really good, has the re-cutter option, small 1000 cv pto, Digi-Star EZ150 scale, 465 cu.ft struck capacity, SN: 960048.

***NEW*** feedlot augers, reg. left hand dogleg, light kit, 10″ rubber ext. SN: 16T0185F

NEW!! Feed lot augers, ext rh dogleg conveyor, tail lights, 10″ rubber ext. single axle, Digistar scale, 1000 PTO SN: 16T0195F

Very nice unit! 600T mixer with hardwelded feedlot augers, very good stainless steel liners, LH chain discharge, 07 Peterbilt truck, single axle, Cummins ISC 260 motor, Allison auto tranny.

***NEW*** cutting augers, knives, left hand extended dogleg, light kit, 10 inch ext, Digi-Star 2500 scale, small 1000 CV PTO, SN: 16T0118F.

**NEW** CV PTO small 1000, cutting augers, RH extended dogleg discharge, 10″ rubber ext. Digi-Star 2500 scale, 385 tires,  SN: 16T0028

**NEW** 8′ Left hand extended dogleg discharge, feedlot augers, single axle with 385 tires, 10″ rubber extension, Digistar scale system, SN: 16T0036F

2011 model, augers are excellent, right hand dogleg discharge, light kit, Digistar scale, wagon is like new condition! SN: 16T0071

3 years old, cutting augers, new plow blades, new auger caps, right hand dogleg discharge, Dinamica scale head, & remote, SN: 16T0013 Very nice looking wagon!

Augers are 50% or so, some new knives, liners are good, right hand dogleg discharge, Dinamic General Stad 4 Plus scale, 10″ rubber extension, 385/65R-22.5 tires, SN: 06T0127D

New Paint! 2007 model, stainless steel liners, new stainless floor liner, screws are 60% with new plow blades, knives are ok, right hand dogleg discharge, airplane tires, small 1000 CV PTO, dinamica generale scale with remote on the left hand side of wagon, 600 cu.ft., SN:06T0187

**NEW** cutting augers, rh 17″ ext. dogleg, small 1000 pto, light kit, 10″ ext.

**NEW** front door with 8′ right hand regular dogleg discharge, feedlot augers, tail light kit, 10″ rubber ext, small 1000 PTO, SN:16T0157

Nice 600T! Stainless steel liners, RH dogleg discharge in good condition, augers are 50% or so with new SS leading edges, new knives, new plow blades and are hard welded, new planetary oil, new paint, sharp looking, dependable mixer!

tail light kit, 17″ right hand dogleg discharge, scale head and remote, cv pto, feed lot augers, SN:16T0018F

New 50″ stainless steel liners, cutting augers are 60% with new plow blades and new knives, new discharge floor liner, dinamica generale scale, right hand dogleg discharge, 540 CV PTO, aircraft tires, light kit, SN: 06T0328

***NEW*** cutting augers with knives, 10″ rubber extension, light kit, 385 tires, 8 foot left hand dogleg discharge with hydraulic extender, Digi-Star 2500 scale, small 1000 CV PTO, SN: 16T0088

2012 model, had new stainless liners and new augers a year ago

right hand flip up discharge, scale and remote, tires are good, nice looking wagon

2013 Model, new 50″ stainless steel liners, new cutting augers and knives, new planetary oil, new Digi-Star 2500 scale head, RH dogleg discharge with hydraulic extender, light kit, 385 tires, small 1000 CV PTO, SN: 16T0023F

***NEW*** Cutting Augers, right hand extended dogleg discharge with hydraulic extender, single axle with 385 tires, light kit, 10″ rubber tub extension, Digi-Star 2500 scale, small 1000 CV PTO, SN: 16T0049.

***NEW*** Cutting augers, small 1000 CV PTO, 385 tires, 8′ RH dogleg discharge with hydraulic slider, conveyor motor plumbed together with extender cylinder, light kit, 10″ rubber tub extension, Digi-Star 2500 scale.

2014 model, one owner local trade, right hand dogleg discharge, hard-welded feedlot augers (around 50%-60% or so), NEW 36″ stainless steel liners, single axle, good tires 385/65R22.5, rear light-kit, fresh planetary oil, Digi-Star EZ2500V scale, small 1000 CV PTO, SN: 16T0224F. Nice looking unit!

2017 model, right hand dogleg discharge, cutting augers, knives are good, augers are 90%, Digi-Star 2500 scale with remote on LH side of wagon, light kit, small 1000 CV PTO, SN: 16T0157F.  Very nice wagon was used 2 loads a day customer went to a truck.

2014 model, New stainless steel liners, dual-augers at about 70% or so, RH dogleg discharge, front door, small 1000 CV PTO, Digi-Star EZ 2500V scale w/ remote mounted on LH side of wagon, light kit, SN: 16T0184F. Very nice wagon!

**Rebuilt* *2011 model, left hand dogleg discharge w/new front conveyor shield, new conveyor chain, new SS tub liners, new augers w/new knives, new rubber extension, Digi-Star EZ 2400V, LH Agri-Tronix remote, light kit, small 1000 cv pto, 600 cu.ft. capacity, SN: 16T0041. Call or stop by for more info!

2017 Supreme 600T, one owner local trade! Hard welded feed lot augers at 70% or so, new plow blades, RH dogleg discharge, SS conveyor floor, mag-tray, large 1000 cv pto, Digi-Star EZ 2810 scale, 600 cu.ft., SN: 16T0097. Sharp wagon!

Used Supreme 600T, left hand dogleg discharge, feedlot augers are 75% or so, new SS liners, newer SS floor in discharge & newer chain, small 1000 cv pto, Digi-Star EZ 2000V, 640 cu.ft., SN: 06T0068D

right hand dogleg discharge, will have new liners, cutting augers are about 40 percent, cv pto, nice looking one owner 600t!!, 2015 model

LH side door discharge, rear commodity door, single axle with dual tires, auger is good, liners are good, knives are ok, J-star scale, small 1000 non-CV PTO, SN: 170020

5 years old one owner local trade, cutting augers, flat conveyor, Weightronix scale with big #’s, large 1000 PTO, SN: 17T047C

Brand new auger! some new knives, rest are like new, right hand angle discharge, slide tray discharge on left hand side, liners are good, small 1000 CV-PTO, EZ 2500 Digistar scale, SN: 070066

Used Supreme 700S Vertical Mixer Wagon, single auger mixer, auger is 85%, knives are good, very good liners, single axle with duals, rubber extension, Digi-Star scale, right hand dogleg discharge, coming in!

***NEW*** Cutting auger, small 1000 CV PTO, right hand, hydraulic flip up discharge, light kit, 10 inch rubber ext, Digi-Star 2500 scale.

**NEW** cutting augers, 5 knives per screw, single axle, light kit,10″ rubber, 8′ right hand dogleg discharge SN:17T0545

New liners, good augers 50-60%, right hand flat conveyor, (optional dogleg avialable) new paint, J-star scale, nice mixer!!

**REBUILT** 2004 model, new cutting augers, new liners, flat discharge, (optional dogleg available) Digistar 2500 scale head

**NEW** cutting augers, recutter, dogleg discharge, 385 tires, scale and remote

8 months old, With RECUTTER option, wagon is like new

Used, all new liners including new floor, rebuilt RH dogleg discharge, good cutting augers, knives are good, all new driveline bearings,  new paint, Digi-Star scale, airplane tires. Large 1000 PTO SN: 07T0012

New paint, new liners, augers are 50-60% with new knives, new auger caps, new 385 tires and rims, RH dogleg discharge, 10″ rubber extension, Digistar scale, SN: 07T0282

**REBUILT** 2007 model, all new stainless steel liners, new augers with hardwelded edges, new knives, new paint, new planetary oil, LH Dogleg dishcarge, Dinamica Generale scale head, like new!!

One owner, 2015 model, right hand extended dogleg discharge, 10″ rubber extension, good cutting augers with new knives, augers are 80% or so, New Digi-Star 2500 scale with remote on LH side, 385 tires, small 1000 CV PTO, SN: 17T0255

**NEW** cutting augers, rh flip up discharge, no lights, cv pto small 1000, SN: 17T0308

Completely rebuilt 2 years ago, new liners, augers, knives & paint. liners are 3/16″, new knives, single axle with 385 tires, flat dual discharge, very nice mixer! Small 1000 PTO SN: 07T0147

2010 model, good 50″ stainless steel liners, augers are 50%, right hand extended dogleg conveyor that is near new, light kit, rubber extension, brand new Digi-Star 2500 scale head, 385 tires, small 1000 PTO, 700 cu.ft. SN: 17T0340.  Nice looking wagon!

***NEW*** cutting augers, small 1000 CV PTO, 8′ RH flip up conveyor, light kit, 10″ rubber tub extension, Digi-Star 2500 scale, SN: 27T0190. Very nice unit!

Used 2009 Supreme 700T, right hand dogleg discharge w/new conveyor chain, new side shields, feedlot augers around 50%, good liners, good knives, Dinamica Generale Stad 04 Plus2 scale system, H40X 14.5-19 airplane tires, new small 1000 PTO, 650 cu.ft., SN: 07T0469.

One owner local trade-in & very nice low use wagon! Has re-cutter on the back w/good hammers, RH dogleg discharge, nice twin-augers at about 70% or so, good knives on the augers, single-axle w/H40x 14.5-19 tires, Digi-Star EZ 3200 model scale, small 1000 pto, SN: 07T0794.

2007 model, dual augers 70%-80% or so, good knives, sliding RH dogleg, front door, rear light kit, good tires, small 1000 PTO, Digi-Star EZ 2500V scale, SN: 07T0157D. **Consigned unit** 60 day warranty not included**

2015 model, one owner local trade, *new*right-hand dog leg discharge, *new*conveyor shields and floor, hardwelded augers w/good knives, *new*SS liners, single axle, good 385/65R22.5 singles, Weigh-Tronix model 2040XL scale, model XLR-6 remote on RH side, light-kit, 649 cu.ft. capacity, small 1000 cv pto, SN: 17T0105

NEW 2020 model!! Right hand flip up conveyor, cutting augers, light kit, 10 in. rubber extension, single axle, 385/65 R22.5 tires, small 1000 cv pto, Digi-Star EZ 2500V scale, 649 cu.ft., SN: 27T0031.

***NEW*** Cutting augers, small 1000 cv pto, 385/65R22.5RT tires, front door, 8′ right hand discharge w/dogleg, 10 in. rubber extension, Digi-Star scale EZ2500V, SN:27T0091.

Rebuilt 2011 Supreme 700T! RH flip up discharge, SS conveyor floor, tip-up w/magnets, hardwelded augers at 70% or so, new cutting knives, new 36″ SS liners, new rubber extension, 385/656 R22.5 tires, small 1000 pto, Digistar EZ 2400V scale, scoreboard remote, 700 cu.ft., SN: 17T0051.

Supreme 700T Vertical Mixer Wagon, right hand extended dogleg discharge, rear commodity door, hard welded augers are 50% or so, has stainless steel liners, coming in! SN:17T0431

**NEW** feedlot augers, 10′ right hand extended dogleg conveyor, cv pto, digistar scale, tail lights, 10″ rubber ext. single axle 385 tires, 2 speed gear box SN:18T0036F

***NEW*** Feedlot augers, 10′ right hand extended dogleg discharge conveyor, CV PTO, Digi-Star scale head, light kit, 10″ rubber extension, single axle with 385 tires, 2 speed gear box, SN: 18T0036F

***NEW***SS liners, SS floor liner, dogleg conveyor with hydraulic flip up, hard welded feedlot augers, 10″ rubber extention, FEPTO, 4600 head, rear door, 2 speed for cleanout.

feedlot augers,

**NEW** cutting augers, light kit, 10″ rubber ext. duals single axle, small 1000 cv pto

One owner, local trade, 2014 model, new feedlot augers, augers have hard weld, left hand dogleg discharge, new drive sprockets, bearings, and shaft on discharge, good stainless steel liners, stainless floor liner on discharge, light kit, Digi-Star EZ 2810 scale, large 1000 CV PTO, SN: 190484F

***New***Cutting augers, large 1000 CV PTO, single axle, 11R22.5 Tires, RH Dogleg, Hydro ext, light kit, 10″ rubber ext, Digi-Star scale 2500.

**REBUILT** new augers and knives, new liners,1000 rpm cv pto, 2 speed gear box, Digi-Star scale head, nice big rebuilt wagon SN:090410

***NEW*** feed lot augers, left hand dogleg discharge,single axle dual tires, digistar scale, tail lights, small 1000 cv pto

NEW!! Feedlot augers, 10′ right hand dogleg conveyor, small 1000 PTO, 10″ tub ext, tail lights, Digistar scale-big numbers SN: 190915F

***NEW*** single axle with duals tires, 10′ right hand dogleg conveyor, feedlot augers, light kit, 10″ rubber extension, Digistar 2500 scale SN: 190246F

Stainless steel liners, 70% augers, new planetary oil, sliding right hand dogleg discharge, new paint, Digi-Star scale, very nice vertical mixer! SN: 99001P

One owner local trade, cutting augers are 50% or so, all new knives, liners are good, left hand dogleg discharge, rear commodity door, single axle with duals, light kit, Digi-Star 2500 SN:190064A28

1 owner, 2014 model, cutting augers @ 80% with new knives, liners are good, right hand 10′ extended dogleg discharge, single axle with dual tires, light kit, small 1000 cv pto, very nice low use unit!

**NEW** cutting augers, 10′ LH dogleg discharge, light kit, 10″ rubber extension, Digi-Star 2500 scale, small 1000 CV PTO

**NEW** feedlot augers, 10′ RH dogleg discharge, light kit, 10″ rubber extension, Digi-Star scale, small 1000 CV PTO

**NEW** cutting augers, 10′ LH dogleg discharge, light kit, 10″ rubber extension, Digi-Star scale, small 1000 CV PTO

Complete rebuild! Right-hand dogleg discharge, feedlot twin augers which are at about 40%- 50% or so, new weigh bars, new SS liners, double axle, good tires 275/70R22.5, rear light-kit, Digi-Star EZ2500V scale, small 1000 cv pto, 900 cu.ft., SN: 1904135.

***NEW*** 10′ RH sliding dogleg discharge, light kit, feedlot augers, small 1000 cv pto, single axle with dual tires, Digi-Star 2810 scale, SN: 190467F

08 model, Cutting augers are @ 60% and are hard welded, 5 new knives per auger, new auger caps, liners are good, right hand dogleg discharge with good chain/sprockets, flip up discharge option available, single axle with duals. SN: 090808

tandem axle dual tires, rh chain discharge, 10 inch rubber ext., led remote on each side, feed lot augers, hard welding on the augers, SN: 190298F

***NEW*** Cutting augers with knives, left hand dogleg discharge, hydraulic sliding discharge, light kit, 10″ rubber extension, single axle with dual 11R22.5 tires, small 1000 CV PTO, Digi-star 2500 scale, 900 cu.ft. SN: 190668

Tandem axle dual tires, 275/70R22.5 tires, right hand dogleg discharge, 10 inch rubber extension, feed lot augers, Digi-Star EZ 2500v scale, SN: 190298F

***NEW*** Feedlot augers, 10 inch rubber ext, single axle with dual 11R22.5 tires, hydraulic extender kit, set up for 3 valves in hydraulics, Digi-Star 2500 scale, 10′ right hand dogleg discharge, small 1000 CV PTO, 900 cu.ft. SN: 190788F

One owner mixer, 2012 model, local trade, feedlot augers are a year old and hard welded, liners are good at 1/8″, right hand flip up discharge, backstop with magnets and tip off tray with magnets, 9″ rubber tub extension, light kit, single axle with dual tires, new Digi-Star 2500 scale head, 900 cu.ft., small 1000 CV PTO, SN: 190602F

***NEW*** Feedlot augers, small 1000 CV PTO, right hand dogleg discharge with hydraulic extender, 10″ rubber extension, Digi-Star 2500 scale.

***NEW*** Feedlot augers, small 1000 CV PTO, 11R22.5 dual tires, single axle, 10′ LH dogleg conveyor with hydraulic extender, light kit, 10″ rubber extension, Digi-Star 2500 scale.

***NEW*** Feedlot augers, small 1000 CV PTO, single axle, dual 11r22.5 tires, 10′ RH dogleg conveyor with hydraulic extender, conveyor orbit motor is plumbed with cylinder, light kit, 10″ rubber tub extension, Digi-Star EZ 2500V scale, SN: 290240. Great unit!

2008 model, new feedlot augers, new stainless steel 10 gauge liners in 2017, LH flip up discharge, single axle, more info and pictures to come!

Rebuilt and re-painted 2008 model! Right hand dogleg discharge w/new extension, nice hard welded feedlot augers between 70%-80% or so, good strong knives, brand new SS tub liners, large 1000 pto, Digi-Star EZ 2000 V scale, single axle, dual 11R22.5 tires,  900 cu.ft. capacity, SN: 090948. Nice rebuild!

cutting augers, dogleg discharge, 10 inch rubber ext.

single axle duals

cv pto

2015 model, complete rebuild! Right-hand dogleg discharge w/new conveyor floor, twin hard-welded feedlot augers at about 70%-80%, new SS liners, single axle w/11R22.5 dual tires, rear light-kit, new Digi-Star EZ 2500V scale, small 1000 cv pto, 900 cu.ft., SN: 190085F. Another nice rebuild with plenty of life left!

2012 model, Rebuilt right-hand 10′ dogleg and rebuilt conveyor, good hard-welded feedlot augers at 70-80%, good knives, new SS liners, single axle, new 11R22.5 dual tires, Dinamica Generale Stad 04 Plus scale, large 1000 cv pto, 849 cu.ft., SN: 190292.

**Rebuilt**Supreme 900T mixer wagon!! Installed good cutting augers 80% or so, new knives, new SS liners, new rubber extension, RH dogleg discharge overhauled, new discharge floor, single axle w/duals, light kit, large 1000 cv pto, Digi-Star EZ 2000V scale, 900 cu.ft., SN: 190142D.

**Rebuilt*Supreme 900T, has 50″stainless steel liners, new SS floor liners, LH dogleg discharge, nice cutting augers that are a year old, good knives, new rear commodity door, light kit, large 1000 cv pto, Weigh-Tronix 640XL scale, 900 cu.ft., SN: 190686.

**Rebuilt**Supreme 900T mixer wagon! New SS wall and floor liners, feedlot augers are 60% or so, RH dogleg discharge, small 1000 pto, Digi-Star EZ 2500V scale, 900 cu.ft., SN: 090516.

2013 Supreme 900T Vertical Mixer Wagon, new flip-down discharge conveyor, new magnets, new hard-welded feedlot augers, new stainless steel liners, small 1000 cv pto, Digi-Star EZ 2500V, 900 cu.ft., SN: 190433F. Nice rebuild!

In stock durable 12000# jack

self loading wagon, 2016 model, local trade, approx 4000 hours, all wheel steer, all wheel drive, 385 tires, a/c, radio

***NEW*** self propelled self loader, the box is 1200cubic foot, load your feed and feed your cattle all with the same unit, saves on shrink for feeding and saves on time for loading,

Supreme International

2015 model, left hand hydraulic sliding discharge, feedlot augers, very nice looking mixer

• Triangle Knife Backing Plate
• Beveled Edge
• Threaded Tip Bolt Hole
• Mild Steel
• 3/4″ Thick
• Fits to Vertical TMR Auger Mixer Wagons