Misc.

Used, day cab, Detroit 60 series engine, 965,000 miles, 3.58 gear ratio, runs good uses no oil, 10 speed tranny, good tires all around aluminum rims, good solid truck.

2004 New Holland FX40 forage harvester, 550 HP Iveco diesel engine with 3,525 hours, 2,383 cutter hours, good hydrostatic drive, 800/65R32 front tires at 75%, 480/70R24 rear tires at 50%, good working Matalert III system, good feed rolls and knives,  spout is in good condition, 360 N6 6row head is included with all new gathering chains, sprockets & bearings, always stored under a roof. This is a nice well maintained machine and everything works as it should! Earleage adapter and 1063 corn head also available for purchase if desired. Call for more info!!

2005 Chevy 4500 truck, Duramax diesel with 260,000 miles, auto tranny, had some injector work done recently, good tires, runs/drives good, dually, has enclosed box on it, rear overhead door entry.

2008 model, 44′ long, tandem axle with super single tires, manual roll tarp, air ride suspension with dump valve, manual hyd. controls to run trailer, poly liners inside trailer.

COMING SOON TO AUCTION TIME!  John Deere 244J mounts, 7 teeth included, 1.5 cubic yard capacity, 6′ 9″ width, nearly new condition!

SN: 0341, Digistar scale system, Baldor 10 HP. electric motor, all 4 augers are good, liners are good, chains & sprockets are good, 16″ discharge door opening with manual crank, has 4 leg stands

Automatic 3620 Roller Mill, good inlet auger, good discharge auger, newer gearbox and belts, small 1000 PTO, coming in!

Used local trade, Hyd. drive web & spinners, new web chain, floor and side walls are good, small 1000 PTO, SN: 20909

Model #: 45GMC, Product ID #: 473D917408, Diesel, 2,547 hrs, tires are good shape, bucket is straight and good, payloader is in nice condition!

Model #: 45GMC, Product ID #: 473D917408, Diesel, 2,547 hrs, tires are good shape, bucket is straight and good, payloader is in nice condition!

Local trade, right hand discharge with hyd. deflector, hammers are good, pan under drum is good, hyd. bale lift, manual slug bar adjustment, implement tires, front screen protector, small 1000 PTO

Nice used Eitzen 1800 feeder wagon, 5’x12′ box, left hand hyd. flip-up discharge, all chains are good, good steel floor and side walls, good tires, Weightronix 615 scale sytem, very nice little feeder wagon!

COMING SOON TO AUCTION TIME!!  Good used H & S 660 dual horizontal beater manure spreader, tandem axle with 385 tires, slop gate, good T-bar web chains & sprockets, good beater teeth, poly floor and side walls, small 1000 CV PTO.  Sold AS-IS.

Tub style bale processor, right hand discharge, hammers are in good shape, hyd. Flow control, runs smooth, nice straight machine. SN: 00190

Homemade payloader bale spear, it has JRB payloader mounts, 10 tines, would be good for handling big square or round bales.

Homemade silage drag, has JRB payloader mounts, customer used to drag any spoilage off the top of his silage pile, it is 12′ long and 4′ wide.

2013 model, 914 hours, 82 HP. ride control, quick tach, skidloader plate adapter, joystick controls, 7′ bucket with good cutting edge, air conditioning, radio. Excellent condition!!

John Deere 4440 newly consigned tractor!

*Consigned item, 60-day warranty not included*

Single axle, single beater, hyd. push spreader, slop gate, handy little spreader, runs good!

duals, front wheel asist

Used consigned slinger, right-hand discharge, center auger style, walking tandem axle, 11-22.5 tires, small 1000 PTO, SN: W00876-X001140.*This is a consigned item, 60 day warranty not included*

22 foot wide, with 3 bar harrow, 960 model

1997 model, *Selling As Is*, 8 ft. W, 18 ft. L, 14 ft. H, 4 ft. side walls without the boards, double axle w/295/75R22.5 tires, scott sisscors lift, steel floor, bull pull hitch. Call for more details!

Excellent condition! Left hand chain discharge, web chains are good, 3 beater bars, good light feeder wagon or use it for a delivery box to the pasture!

Used, small 1000 PTO driven, on Mighty Giant frame, 200-250 bu. grain hopper, 24′ belt unload, has magnets, 12″ x 6′ rollers just sharpened, 2500-3000 bu/hr. in nice shape, all rebuilt a year ago

2,000 lb. Leo 6075 Vertical Mixer, good auger w/ knives, left-hand discharge w/magnet, Intercomp scale, Honda GXV 630 motor w/ 93.5 hours, tires are good, 75 cu. ft. capacity.

*Consigned item, 60 day warranty not applicable*

*Consigned* low use mixer w/ around 50 hrs on it or so, General Electric induction motor 50 HP, Concentric hydraulic motor, PTO driven auger, right side discharge door w/ magnets, auger flighting is 1/2″ to 5/8″ thick, good knives, 350 cu.ft. capacity, SN: 021ST. Neat mixer!

**Consigned unit – 60 day warranty not included**

4 auger mixer, left hand chain discharge, scale with remote, light kit, 1000 PTO

2009 model, 95 hp diesel, 2483 hours, 2 wheel drive, open platform, 16-9-34 rear tires at 50%, rear wheel weights, 3 point, left hand reverser. Hood guard available. Runs excellent! SN:10299

Nice used side-shooter, NEW main conveyor chain, NEW sprockets, good cross belt conveyor that dispenses either side, walking tandem axles, 11R 22.5 tires, 540 pto, planetary gearbox drive system, self-contained hydraulics, walls are in good shape, SN: 17022. Stop in for a look!

Good used 3-auger system with vertical beaters.

Triple auger vertical mixer wagon.

Very good used Roto-Grind 760 tub grinder/bale processor, good set of hammers, blower spout on left hand side, tub chain in good shape, small 1000 PTO, SN:2264118, very nice straight unit!

**NEW** Made by West Point Design, 11′ wide, pintle hitch, replaceable 5/8″ steel cutting blade, steel wear plates along bottom edge on each side, 30″ clearance when raised way up, 28 ply tires

Consigned item, 2013 53’x102″ Trail King belt trailer, model #ASHR3-5275-48, triple ax w/rear liftable tag axle, all rubber is 50%, all new brake pads, Shur-co electric tarp w/new tarp in May 2017

Used one owner, local trade, 2015 model, 50′ long, 96″ wide, 2′ silage sides, has a tarp, great trailer for distillers grain etc. customer changed his feed program and bought a silage trailer instead

Single axle with duals, 5th wheel plate slides, has air tank on front, 10.00 x 20 tires

Nice used Tubeline Bale Boss 2 Bale Processor! Pull type processor made for square bales, flails are 50%-60% or so, discharges out the left side, good forks, 12.5L-15SL tires, small 1000 pto, SN: 14B238.

4 auger mixer, bottom augers are 80-90%, top augers are 40-50% or so, left hand chain discharge, stainless steel auger liners, Weightronix scale

6 row 30″ planter, yetter trash whippers,insecticide boxes, sm 3000 monitor, corn and bean plates, planter is in great shape

Consigned item, does not include a 60 day warranty!

22 ft. wide stalk chopper, new seals in gearbox, knives are in great shape, nice!