Shop

scale, good wagon 3 Auger discharge (PEC LOANER WAGON)

scale, slide tray, good reel (PEC LOANER WAGON)

3 auger discharge, nice conditon ( PEC LOANER WAGON) from Steve Kooima

Used Knight 3050 Reel Feed Mixer! Wagon just went through our shop and was serviced and checked over. Everything is in working order as it should be but will be sold “AS IS”. Slide tray with magnets discharge, good augers, stainless steel auger liner by the door, 5 bar reel! 540 PTO, Weigh-Tronix scale head, travel lights! Ready to go!

6 months old, feed lot augers, scale and remote, 42″ RH flip up conveyor

Parted Out.

skidloader mounts auger bedding extracter for free stalls

Burned unit

needs work, has been rebuilt, burned

Burnt

New

Heavy duty replacement jack

Bull pull hitch w/various size inserts,HD hitch base with insert

Replacement clevis hitch

In stock durable 12000# jack

High quality,Large in stock inventory on hand, Competitive Pricing

-TMR Feed Mixer Spindle
-#12,000
-3″x20″
-PTA2041

-Axle Hub
-10 Bolt
-#16,000 weight capacity
-TMR Spindle Hub
-PTA2050

Oil bath hub replacement parts

High quality, low cost, large in stock inventory on hand, Competitive Pricing

In stock replacement Supreme parts

In stock hub,spindle parts for single screw model Supreme mixers,same day shipping

Durable heavy duty hubs, 10 bolt, competitive pricing

Competitively priced tire assemblies in stock, different sizes available

Supreme replacement rims, Several different rims in stock

Quality new tires on hand for many different model TMR feed mixers

Quality new tires on hand for many different model TMR feed mixers

Penta replacement rims in stock

– Standard Triangle TMR Mixer Blade Compatible
– Busatis
– Vertical TMR Mixer
– Feed Wagon

– Standard Triangle TMR mixer blade compatible
– Heat Treated
– Vertical TMR Mixer
– Feed Wagon

– Heat Treated
– Fits to Penta, Kirby TMR Mixer Brands
– 3/8″ thick
– Optional mounting holes
– Curved one side for more aggressive feed cutting

Extreme wear auger kickers, 11″ and 16″ available

Replacement stainless steal Penta and PEC style plowblades

Replacement auger leading edge parts in stock

Feed restricter adjustable plate

Durable replacement auger cap

Quality Kuhn Knight replacement mixer knives in stock,

Replacement auger caps, available in 16″,18″,and 20″ diameters in stock

Competitively Priced, call Post Equip and get a quote on your next set of replacement augers

Competitively Priced, call Post Equip and get a quote on your next set of replacement augers

Competitively Priced, call Post Equip and get a quote on your next set of replacement augers

Replacement Auger plowblades in stock for new and old model wagons

Low cost, quality, vertical liner kits, many different options available, Call Post Equipment to see what options are available for you

Low cost, quality, vertical liner kits, mild steel and stainless steel options available, Call Post Equipment to see what option is right for you

Complete PTO assemblies in stock ready to go

Complete inventory in stock with a variety of different replacement bearing cross kits available.

– Cross Kit / Drive Line
– U-Joint
– 55 Series Power Take Off
– 1/17/32″ X 4-5/16″
– Wiesler

Stay safe with a QUALITY replacement PTO shield, many different options and sizes available

Large in stock inventory with many different types of PTO yokes available

Complete planetary drivelines in stock

Complete Vertical TMR drivelines available and many in stock ready to go

LARGE IN STOCK inventory with many different types and styles of bearings available

2-Speed cable and shifter handles in stock,15′ long cable

GB and Comer gearboxes in stock,1.3,1.5,and 1.8 Ratio

Call Post Equipment for all your planetary repairs or pricing on a replacement planetary

Conveyor replacement parts on hand and ready to go to keep your operation up and running, Low Cost Shipping options available

– Coupler Sprocket
– Chain coupler
– 1-1/4″ X 1″ ID
– Fits all Supreme Conveyors
– Includes dual width chain

Powerful magnets IN STOCK, available in many different sizes to fit your evey need.

Replacement conveyor chains on hand for many different brands and models of TMR feed wagon mixers

Replacement conveyor chains on hand for many different brands and models of TMR feed wagon mixers

Heavy Duty,Quality,Long Lasting replacement motors and sprockets IN STOCK ready for you.

Post Equipment designed and fabricated backstop assembly. Give us a call today.

Post Equipment designed and fabricated backstop assembly. Give us a call today.

Remote scale brackets are available for your TMR feed mixer wagon

Remote brackets available at Post Equipment, give us a call and see what we can do for you.

Competitively priced scale indicators and cab control units on hand. Many options available

Competitively priced scale indicators and remote displays on hand. Call our experienced Scale Dept. today!

In Stock inventory of many scale parts and many different options available. Give Post Equipment a call today.

Competitively priced scale indicators and remote displays on hand. Call our experienced Scale Dept. today!

Remote scale brackets available at Post Equipment. Give us a call and see what we can do for you.

High quality, low cost,large in stock inventory on hand, Competitive Pricing

Low Cost,Large Inventory on hand to keep you up and running, Call Post Equipment for all your hub and spindle needs

Quality, LOW COST, replacement aircraft tires in stock in various different sizes.Tubes and tire liners also in stock

New or used replacement tires and tire rim assemblies in stock, many different size options available

Replacement aircraft rims in stock for various different size aircraft tires

Quality competitively priced auger mixer knives, Large inventory in stock, available for both early and late models

High Quality, LOW COST complete auger assemblies, several different sizes in stock, many other options available. Competitive shipping options also available

Low cost, quality replacement flighting ON HAND for many different horizontal mixer augers. Many custom options available, Call Post Equipment TODAY.

– Left Hand Direction
– 14″ Diameter
– 10″ Pitch
– 4″ Inside Diameter
– .25″ thick
– Smooth Edge
– Holes for Knife mounting
– Mild Steel
– Knives not included

Heavy Duty replacement horizontal auger kicker plate, available for several different models

Replacement horizontal idler and drive plugs on hand for many different makes and models

Quality,Durable,Replacement reel for your horizontal TMR feed mixer wagon

• Kuhn Knight Replacement Parts
• TMR Mixer Reel Part
• Steel Tensioner Spring
• 3x3x16 Steel Coil
• Fits to 3025

Replacement bushing bearings on hand in several different sizes for many different makes and models

Replacement LOW COST reel mixer wiper bars ON HAND for both early and late model TMR wagons

Replacement LOW COST reel mixer wiper bars ON HAND for both early and late model TMR wagons

Replacement LOW COST reel mixer bars ON HAND for both early and late model TMR wagons

-Farm Aid TMR Feed Mixer
-Mixing Kicker
-Back Kicker with belt
-FA335B

Replacement clean sweep belts on hand for several different models

Farmaid 340,430 poly liner kits on hand, poly kits for several other models also available

Quality replacement discharge door in stock ready for you

Quality,LOW COST replacement reel and auger liners.Many different options on hand with shipping options also available

Quality,LOW COST replacement reel and auger end liners.Many different options on hand, other options avaiable

LOW COST, High Quality replacement discharge doors for your TMR reel feed mixer wagon. Many options on hand ready for you.

Large IN STOCK inventory of PTO yokes and bearing kits to keep your downtime to a minimum. Variety of different series and brands

Replacement input shaft gearbox seal and seal plate, many other different seal options IN STOCK

High Quality,Durable,Competitively prices replacement bearings, many different options and types IN STOCK and many others available

Replacement tensioner arms and several different sizes and types of poly blocks in stock

Quality replacement sprockets on hand in many different sizes, both large and small

Jack shafts and bearings for several different models and brands available

Several different sizes of poly bushing bearings on hand

Complete,low-priced, high quality, durable,replacement 3 auger discharges on hand ready to be shipped. Call Post Equipment TODAY

Complete,low priced, high quality, durable replacement 3 auger discharges on hand ready for you. Call Post Equipment TODAY

Quality,Low price, tip-offs IN STOCK Call us today

Quality, competitvely priced, replacement slide trays

Quality,Low price, tip-offs IN STOCK Call us today

Early model replacement slide trays and tip-offs IN STOCK

• 3 & 4 Auger TMR Mixer Discharge Sizes
• Replacement Feed Mixer Discharge Auger
• 43″ Overall Length To End of Shaft

Heavy Duty,Quality,Long lasting, hydraulic motors,several different options available

All 3 auger replacement parts IN STOCK to keep you up and running. LARGE inventory of Kuhn Knight parts on hand.

Replacement slide tray spout w/magnet option on hand, different options available

Complete replacement conveyor assemblies on hand, conveyor shell only option also available and on hand

Quality conveyor chain assemblies on hand in 3′, 4′, and 5′ lengths

Powerful magnets IN STOCK,available in many different sizes to fit your every need.

Quality, Durable, Low Cost replacement clevise hitch

Low Cost,Large Inventory on hand to keep you up and running, Call Post Equipment for all your hub and spindle needs

Low Cost in stock inventory of replacement tires in several different sizes

Quality in stock inventory of various different rim sizes

-2 hole
– Right-Hand direction

Quality, LOW COST, Complete horizontal auger assemblies available, some in stock

LOW COST,Quality replacement flighting options available, many in stock flights and many other options avaliable

Replacement auger kickers in stock

Large IN STOCK inventory of many different auger plug options

Large selection of replacement discharge doors in stock

Quality,LOW COST replacement auger liner options available

Large selection of replacement discharge doors in stock

Complete replacement bushing bearings as well as inserts on hand

High Quality,Durable,Competitively prices replacement bearings, many different options and types IN STOCK and many others available

Poly tensioner blocks in stock

Discharge augers IN STOCK in 30″,38″, and 47″ lengths

Replacement discharge shell options avialable in 31″,39″, and 48″ lengths

Quality, LOW COST Tip-off option on hand ready for you

Quality replacement cylinders on hand in a variety of different length and sizes. Call and see whats will work best for you.

Large, In Stock inventory of quality replacement discharge parts

LOW COST, Quality replacement discharge chains in stock

Top wind bunk feeder jack

Replacement hubs and bearings available

Quality replacement tires IN STOCK, available in different sizes

Replacement babot bearings of several different sizes IN STOCK

Replacement lift chains ready for installation, Call for details

Replacement lift chains ready for installation, Call for details

Replacement cross conveyor chains available. Call for details

Right angle 90* gearbox IN STOCK 1:1 Ratio

Large selection of pto parts IN STOCK

Replacement discharge augers available

Quality,heavy duty,durable toy feeder wagons and feed bunks on hand w/feed included

Quality hitch pins in stock, 7/8″- 1 1/8″ in size

Large selection of complete PTO assemblies IN STOCK to keep you up and running.

Several different sizes of poly bushing bearings on hand

Input shafts and large IN STOCK inventory of bearings for several different models and brands available

Input shaft seals, bearing seals, and many other seals in stock and readily available

Several different sizes of poly bushing bearings on hand

Replacement break-away paddle for slinger auger

Quality replacment discharge doors available

High quality cylinders on hand in variety of different sizes

Auger liner options available

Replacement hammer shaft in stock

Individual hammers or complete hammer kits IN STOCK

Shroud adjustment plate

Replacement Shroud IN STOCK

New, LOW COST, Quality tires IN STOCK in several different sizes

Complete replacement gearbox IN STOCK

Replacement drive belts IN STOCK to keep your down time to a minimum

Large IN STOCK inventory of PTO yokes and bearing kits to keep your downtime to a minimum. Variety of different series and brands

Internal gearbox parts IN STOCK, Call Post Equipment today

Complete PTO assemblies IN STOCK

Replacment beater stub shafts IN STOCK

Quality replacement sprockets and hubs IN STOCK

Complete replacement gearbox IN STOCK

Internal gearbox parts IN STOCK, Call Post Equipment today

Complete PTO assemblies IN STOCK

Complete PTO assemblies IN STOCK

Large IN STOCK inventory of PTO yokes and bearing kits to keep your downtime to a minimum. Variety of different series and brands

Large selection of Internal BERMA gearbox parts IN STOCK.Call Post Equipment today

Large IN STOCK selection of various sizes and dimensions to fit your every need. Call for details

Heavy duty, quality replacement beater knives and paddles IN STOCK

Complete auger assemblies for Knight Mixer wagons in stock; auger assemblies for other makes and models available.

Bottom auger flighting for all sizes of Knight mixer wagons in stock; other models available.

Top auger flighting for all sizes of Knight mixer wagons in stock; other models available.

Kuhn Knight in stock, other makes and models available

Kuhn Knight in stock, other makes and models available

fits to application…

Jay-lor, Penta, Supreme, Knight, Loewen, Schuler, Peecon, Laird, Kirby, Diamond

Kuhn Knight, Botec

Supreme International

Knight Little Auggie and Knight Big Auggie wagons

Oswalt and Mono-Mixer Wagons

Roorda, Roda, and New Tec NT bunk feeder wagons

All vertical and reel mixer wagons; other farm equipment

Vertical and reel mixer wagons; farm machinery

Mono-Mixer, MaxiMixer

Penta Verticals

Vertical and reel mixer wagons; other farm equipment

Vertical and reel mixer wagons; other farm equipment

Vertical and reel mixer wagons; other farm equipment

Kuhn Knight in stock, other makes and models available

Reel mixer wagons. Kuhn Knight in stock, other makes and models available.

Reel mixer wagons. Kuhn Knight in stock, other makes and models available.

Keenen horizontal mixers

All models of Henke wagons

Knight, Roto Mix, and other reel mixer wagons

Supreme Vertical Mixers

Knight, Botec, and other mixer wagons

Roto Mix Wagons

Commercial Duty Farm Aid mixer wagons

All models of Henke Wagons

Gehl wagons

Schwartz wagons

Knight, Jaylor, and other mixer wagons

Cattlelac Feed Mixers

Penta SD and HD Vertical Mixers

Supreme Vertical Mixer Wagons. Competitively Priced, call Post Equip and get a quote on your next set of replacement augers

Quality hitch pins in stock, 7/8″- 1 1/8″ in size

Quality replacement 7000# sidewind jack and 2000# topwind jacks IN STOCK

Oswalt,Henke,Harsh,Botec,Schwartz,
Lucknow,Cattlelac,Monomixer,
Kuhn Knight, may also work for
many other makes and models

Complete PTO replacement options available, Call and see what options are available for you

Weasler, Waltershied, Comer, Bondioli. Call Post Equipment for details

Large IN STOCK inventory of PTO yokes and bearing kits to keep your downtime to a minimum. Variety of different series and brands

IN STOCK inventory of PTO shields, be safe and get a QUALITY PTO shield from Post Equipment

PTO slip clutch parts on hand.

Large in stock selection of various gearbox input shaft option

Large in stock selection of various gearbox input shaft options

• Kuhn KNight Replacement Magnet Part
• Magnet Tray Replacement Part
• 3 Auger Tip Tray Replament Magnet
• Supreme Replacement Slide Tray Magnet
• Bolt In
• Replacement Magent
• 15″ Magnet
• Reel Auger TMR Mixers
• Vertical TMR Mixers

-Trailer Jack
-Feed Mixer tongue Jack
-2000lb Rating
-10″
-JACKTWSRD200

Will work for many different
brands and models of slingers
and other misc.types of equipment

Heavy duty,durable replacement bolt on clevis hitch, many different options available

Quality replacement hubs and spindles IN STOCK

Kuhn Knight, may work for other models as well. Call Post Equipment for details.

Weasler,Waltershied,Comer,
Bondioli, Many different options available. Call Post Equipment for details

Quality replacement 12000 lb jack

Heavy duty,durable replacement bolt on clevis hitch

Replacment hubs IN STOCK

Quality, LOW COST in stock inventory of hub bearings and seals available

Quality, LOW COST replacment tires IN STOCK, available in several different tread patterns

Heavy duty replacement rims at Post Equipment IN STOCK

Heavy duty replacement rims at Post Equipment IN STOCK

Heavy Duty, Quality, LOW COST manure spreader apron chains IN STOCK

Heavy Duty, Quality, LOW COST manure spreader apron chains IN STOCK

Replacement Idler and Drive sprockets on hand

Replacement Idler and Drive sprockets on hand

Double roller coupler chain IN STOCK in several different sizes

Large IN STOCK inventory of quality lOW COST roller bearings in a variety of different sizes

Large IN STOCK inventory of quality lOW COST roller bearings in a variety of different sizes

Replacement beater chisel teeth with bolts included for both horizontal and vertical beaters

This Lil’ Mix Feeder Wagon has a 1/16 size scale, an operating door and a crank handle to mix and serve feed. These toys are heavy duty as they are built from real steel and last for generations to come. Each wagon includes toy hay, silage and corn. Made in the USA. This feeder wagon is the perfect gift for that little farmer of yours!

This Lil’ Shred Bale Processor has a 1/16 size scale, a moving door and moving forks. These toys are heavy duty as they are built from real steel and last for generations to come. Each wagon includes two plastic round hay bales. Made in the USA. This bale processor is the perfect gift for that little farmer of yours!

This Lil’ Mix Feeder Wagon has a 1/16 size scale, an operating door and a crank handle to mix and serve feed. These toys are heavy duty as they are built from real steel and last for generations to come. Each wagon includes toy hay, silage and corn. Made in the USA. This feeder wagon is the perfect gift for that little farmer of yours!

4 prong bale spear, skidloader mounts

NEW, triple axle, led work lights, rear hitch

NEW, led lights, triple axle

NEW triple axle, front and rear steer, led work lights

NEW! triple axle, front and rear steer, led work lights

Truck and box are 2014 models, full stainless liners, staggered rotor mixer, augers are 30%, Digi-Star scales, single axle, Kenworth T370 with 9200 hours, PX-9 motor, SN: 410339411.  Excellent condition! Super sharp unit!

***NEW***SS liners, SS floor liner, dogleg conveyor with hydraulic flip up, hard welded feedlot augers, 10″ rubber extention, FEPTO, 4600 head, rear door, 2 speed for cleanout.

***NEW***  Penta 9830 Mixer Wagon, sliding dogleg discharge, 3/8″ tub wall, 6 point weighing system, rear door, 3/4″ auger, mounted on 2020 HX620 SBA 6×4, Cummins motor, Allison 4500 Transmission, Big Radiator.

Head Count: 42

Capacity: 8 gallons

Weight: 520 lbs

Size: 21″ L x 21″ W x 26″ H

J210-F: Constant Flow

J210: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 84

Capacity: 20 gallons

Weight: 1060 lbs

Size: 36″ L x 35″ W x 25″ H

J360-F: Constant Flow

J360: Electric

Head Count: 108

Capacity: 45 gallons

Weight: 1400 lbs

Size: 48″ L x 35″ W x 25″ H

J480-F: Constant Flow

J480: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 96

Capacity: 15 gallons

Weight: 700 lbs

Size: 48″ L x 21.5″ W x 16″ H

J48-F: Constant Flow

J48: Electric

Head Count: 156

Capacity: 68 gallons

Weight: 1910 lbs

Size: 72″ L x 35″ W x 25″ H

J720-F: Constant Flow

J720: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 150

Capacity: 22 gallons

Weight: 950 lbs

Size: 74″ L x 24″ W x 14″ H

J74-F: Constant Flow

J74: Electric

Head Count: 168

Capacity: 50 gallons

Weight: 1670 lbs

Size: 85″ L x 23″ W x 26″ H

J850-F: Constant Flow

J850: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 168

Capacity: 25 gallons

Weight: 1100 lbs

Size: 85″ L x 21.5″ W x 16″ H

J85-F: Constant Flow

J85: Electric

Head Count: 188

Capacity: 55 gallons

Weight: 1990 lbs

Size: 94″ L x 23″ W x 28″ H

J940-F: Constant Flow

J940: Electric

Head Count: 108

Capacity: 45 gallons

Weight: 1400 lbs

Size: 94″ L x 23″ W x 18″ H

J94-F: Constant Flow

J94: Electric

Head Count: 204

Capacity: 98 gallons

Weight: 2610 lbs

Size: 96″ L x 35″ W x 28″ H

J960-F: Constant Flow

J960: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 204

Capacity: 30 gallons

Weight: 1275 lbs

Size: 100″ L x 21.5″ W x 16″ H

J99-F: Constant Flow

J99: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 240

Capacity: 72 gallons

Weight: 2600 lbs

Size: 120″ L x 23″ W x 28″ H

J1200N-F: Constant Flow

J1200N: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 252

Capacity: 160 gallons

Weight: 3040 lbs

Size: 120″ L x 35″ W x 25″ H

J1200W-F: Constant Flow

J1200W: Electric

*Optional Stainless Steel Trough available with this model.

Head Count: 240

Capacity: 85 gallons

Weight: 1800 lbs

Size: 120″ L x 26″ W x 18″ H

J120-F: Constant Flow

J120: Electric

Head Count: 288

Capacity: 95 gallons

Weight: 3070 lbs

Size: 144″ L x 23″ W x 28″ H

J1440N-F: Constant Flow

J1440N: Electric

Head Count: 288

Capacity: 200 gallons

Weight: 3730 lbs

Size: 144″ L x 35″ W x 25″ H

J1440W-F: Constant Flow

J1440W: Electric

Head Count: 340

Capacity: 240 gallons

Weight: 4400 lbs

Size: 168″ L x 35″ W x 28″ H

J1680W-F: Constant Flow

J1680W: Electric

*Optional Stainless Steel Trough available with this model.

4 wheel steer , water ring, ac/ radio, unloading belts

Self loading wagon, 2016 model, local trade, approx 4000 hours, all wheel steer, all wheel drive, 385 tires, a/c, radio!

NEW!!  Hydraulic bale lift, 3 bale carry option, clevis hitch, 2 to 3 remote for 3 hydraulics

NEW! Front Engine PTO drive, stainless steel wall liners, 8 foot sliding discharge

2018 Peterbilt 367 truck with a 1400T Supreme vertical mixer mounted on it, Stainless steel liners are in good shape, feedlot augers are around 40 percent, Front Engine Pto set up, truck has a cummins motor in it with a 4500 allison transmission with a drop box for slower speeds, truck is set up right and well maintained!

***NEW*** 1015 Tub Grinder by Jones Manufacturing, Plus 1 controller, Remote, SN: 1015-21-0008

2005 Mighty Giant PTO Tub Grinder 2015, swing elevator, wireless remote, 6″ hay screen. This machine will grind any type of forage or grain for your livestock needs. Give Dan or Chad a call!

2009 model 1170 Kuhn Knight manure spreader mounted on a 2003 Mack truck! Tires are new as of 2019, 10,024 hours and 214,327 miles on the truck. Mack engine AC-460P model CX613, Eaton Fuller 13-speed transmission model RTLO-16913A. Comes w/silage kit, healthy vertical beaters w/good teeth, new webs as of Oct. 2019. All around quality unit!

Kuhn Knight, TMR, Reel Mixer Spring
SPRING, REEL, KK, 171920, 16″

• Triangle Knife Backing Plate
• Beveled Edge
• Threaded Tip Bolt Hole
• Mild Steel
• 3/4″ Thick
• Fits to Vertical TMR Auger Mixer Wagons

• Spreader Teeth
• Beater Tip
• Reversible
• AR400, 1/2″ Thick
• Compatible with JBS, MEYER’S, RODA, HAAGEDOORN, ARTEX

• Spreader Tooth
• Bent Steel
• Right Hand
• AR400
• Vertical Beaters
• Vertical Spinners
• Manure Spreader
• 1/2″ Thick
• Compatible with JBS, MEYER’S, RODA, HAGEDORN, ARTEX

• Kuhn Knight Replacement Beater Tooth
• Bolt on
• Bolts Not Included
• High Ware
• Left Hand Tip
• Vertical Beaters
• Vertical Spreaders
• MILD STEEL

• Kuhn Knight Replacement Beater Tooth
• Bolt on
• Bolts Not Included
• High Ware
• Right Hand Tip
• Vertical Beaters
• Vertical Spreaders
• MILD STEEL

• Kuhn Knight Replacement Beater Tooth
• AR400
• Bolt on
• Bolts Not Included
• High Ware
• Right Hand Tip
• Vertical Beaters
• Vertical Spreaders

Vertical Manure Spreader, Replacement Beater Teeth, Kuhn Knight

– Replacement Shred Flail
– Bale Shredding Replacement Tips
– 5/8″ X 4″ Grade 8 Bolt
– Fits all Haybuster Model Bale Shredders

– Water Fountain Heating Element
– 1000 WATTS
– 120V
– Johnson Concrete Livestock Water Troughs

– Kuhn Knight Replacement Magnet Part
– Magnet Tray Replacement Part
– 4 Auger Tip Tray Replacement Magnet
– Supreme Replacement Slide Tray Magnet
– Bolt In
– Replacement Magnet
– 18″ Magnet
– Reel Auger TMR Mixers
– Vertical TMR Mixers
– Rotomix TMR Mixer Slide Trays

– Replacement Shred Flail
– Bale Shredding Replacement Tips
– 5/8″ X 4″ Grade 8 Bolt
– Fits all Haybuster Model Bale Shredders

Complete Bearing, 2″ Bore, 4 Bolt, W/ Set Screws

Complete Bearing, 1-1/2″ Bore, 4 Bolt, W/ Lock Collar

– Farm Aid TMR Mixer
– Truck Mixer
– Trailer Mixer
– Paddle Recoil spring

– Spindle Not Included
– Spindle Nut Not Included
– 12,000lb Capacity
– TMR Mixer Hub
– 8 Bolt
– Complete Assembly

– 6″ Diameter
– Johnson Concrete Fountains
– Cattle Waterer
– Copper
– Livestock Trough Float

– Digi-Star
– 30′ Cord
– Weigh Cell
– Load Cell

– Thermostat
– Cattle Fountain
– Temperature Control
– 3/4″ Thread

– Chisel Tooth
– Replacement Beater tip
– Left Hand Side
– No Hardware Included

– Chisel Tooth
– Replacement Beater tip
– Right Hand Side
– No Hardware Included

– Bevel Gear
– 22 Tooth
– Spline Shaft
– Berma Gear
– Tower Gear

– Bevel Gear
– 13 Tooth
– Spline Shaft
– Berma Gear
– Tower Gear

Wheel Bearing, Timken 460 1.75″ ID, Bearing Cone

– Cross Kit/Drive Line
– U-Joint
– 35 Series Power Take Off
– 1-1/4″” X 3-7/32″
– Wiesler

– Weigh Bar
– Dimension 2-1/8″D, 2-1/8″G
– 5P, WT 30 FT CORD
– 7500 LB CAP

• Penta, Kuhn Knight, RotoMix, Farm Aid, NDE, Trioliet Replacement Magnet Part
• Magnet Tray Replacement Part
• Supreme Replacement Slide Tray Magnet
• Bolt In
• Replacement Magnet
• 17.5″ Magnet
• Reel Auger TMR Mixers
• Vertical TMR Mixers”

– 5 Wire /4 pin
– 30′ Long
– Weather Proof
– Junction Box
– Threaded Collared
– Scale Parts
– DigiStar”

Wheel Bearing Race, Timken 33462, 4.6250, Bearing Cup

– 2 1/8″” Diameter Weighbar
– Fits to Models 300 through 900T Mixers
– 30′ Cord attached

– Cattle Feeding Scale Head
– Bluetooth technology indicator
– Feed Scales
– Livestock
– Perfomance Livestock Analytics
– 10″ x 8″ x 3.5″
– Screen Size 7.5″ x 2″
– 1000 Foot Bluetooth Range
– Compatible Load Cells

– 2 1/8″ Diameter Weighbar
– 21′ Cord included
– DigiStar
– Hitch, Load, Weighbar

Wheel Bearing Race, Timken 453A, 4.2500, Bearing Cup

– 1″ Heavy Duty Float valve
– Mechanical
– Water Fountain
– Livestock Tank
– 60 Gallons Per Minute
– 1″ Inlet / Outlet
– Heavy Duty PVC

– 1/4″ Stem Inlet
– Round Plastic Ball Float
– Livestock Waterer

– Standard Curved Knife
– Heat Treated
– Hardened

– Vertical Mixer Knife
– Feed Wagon Knife
– TMR Mixer Blade
– 20″ Style Knife

– Replacement Sectional Flight
– 20, 16, 8-5/8″,.25, RH, HOLES FOR KNIVES
– See Flightin Key in Pictures

– Replacement Sectional Flight
– 18, 14, 5-9/16″,25, RH, With Hole For Knives
– See Flighting Key in Pictures

– Fit Kuhn Knight Horizontal Mixers
– Kuhn Knight Botec Mixers
– RotoMix Mixers
– Left Hand
– Hardware Not Included

– Fits 3 & 4 Auger Discharges
– Bronze
– 1.38 ID x 1.625 OD x 1.5″

– Replacement Sectional Flight
– 14, 10, 4, .25, RH, HOLES
– KK, 134740, 134741, 134742

– Fits to 3 & 4 Auger Discharges
– Bronze
– 1.38 ID

Complete Bearing, 4 Bolt, 1-3/8″ Bore, W/ Lock Collar

– Left Hand Direction
– 15-5/8″ Diameter
– 16″ Pitch
– 4″ Inside Diameter
– .38″ thick
– 6 notch design
– Holes for Knife mounting
– Mild Steel
– Knives not included

Supreme, TMR, Vertical Mixer, Conveyor Drive Bearing, 1-1/4″ Bore, 4 Bolt,  W/ Set Screws

– Flighting protector
– High Wear
– AR400
– Straight blade
– Hardware not included
– Applications – JBS, Meyer’s, Roda, Haagedoorn, Artex Manure Spreaders

– Bushing
– Replacement Flail
– Fits to Haybuster, Fair Bale Processors

– Heat Treated
– 90 Degree
– Fits to Jaylor Vertical TMR Mixers

– AR 400
– Replacement
– Disc Knife
– JBS15087

Complete Bearing,W/ Set Screws, 4 Bolt, 2-1/2″ Bore

– 5 wire
– 15′ long
– weather proof
– Junction Box
– Threaded coupling end
– Scale Parts

48 ton spring suspension, 750 tires,

– Fits 3 & 4 auger TMR Discharges
– Tensioner Spring
– Kuhn Knight Replacement Part
– 3.94 LG

– Dual Sprocket
– 3 & 4 auger discharges
– Kuhn Knight Replacement Parts
– 50-2R-18
– 1.38″ BORE

– Power Cable
– DigiStar
– 2 Flat Connector
– Kuhn knight replacement part # KK173254
– Positive / Negative Eyelets

Complete Bearing, 1-1/8″ Bore, 4 Bolt, W/ Set Screws

– 7.5″ long
– Serrated Edge
– Kuhn Knight Replacement Mixer Knife
– # KK141406

Complete Bearing, W/ Set Screws, 4 Bolt, 1-3/4″ Bore

– 6 Tooth Sprocket
– 2082H Chain Application
– 1-1/4″ Bore
– Replacement TMR Part
– Fits to All Supreme Conveyor Assemblies
– woodruff key not included

Complete Bearing, W/ Lock Collar, 1-1/2″ Bore, 2 Bolt

– Fits all RotoMix Cross Bar Horizontal Mixers
– TMR Mixer Bars
– 2-1/2″ X 24″
– RM Part # 410005

“- Mild Steel
– Formed
– 15.63″ Outside Diameter
– 16″ Pitch
– .38” Thick
– Right Hand Direction
– 6 Notch Design
– Holes placed for Knife Mounting
– Knives not included
– KK133832

Complete Bearing, 4 Bolt, 1-1/2″ Bore, W/ Set Screw

Bearing Race Set, 32210, Cup Cone Set

Complete Bearing, 4 Bolt, 2″ Bore, W/ Lock Collar

Bearing Race Set, 32209, Cup Cone Set

-Vertical Feed Mixer knife
-For NDE TMR Mixers
-4 Hole Bolt Mount
-NDE10008

-Farm Aid TMR Feed Mixer
-Mixing Kicker
-Front Kicker with belt
-FA335F

-TMR Feed Mixer Spindle
-#16,000
-4″x23″
-PTA2051

– Left Hand Direction
– 20″ Diameter
– 16″ Pitch
– 8-5/8″ Inside Diameter
– .25″ thick
– Smooth Edge
– Holes for Knife mounting
– Mild Steel
– Knives not included

– Left Hand Direction
– 18″ Diameter
– 14″ Pitch
– 5-9/16″” Inside Diameter
– .25″ thick
– Smooth Edge
– Holes for Knife mounting
– Mild Steel
– Knives not included

POINT scale head, Bluetooth technology, multiple display options, available with 4 different connector configurations, made to withstand all types of weather

To learn more about the POINT scale, read our blog about it by clicking here.

• Spread Tooth
• Bent Steel
• Left hand
• AR400
• Vertical Beaters
• Vertical Spinners
• Manure Spreader
• 1/2″ Thick
• Compatible with JBS, MEYER’S, RODA, HAAGEDOORN, ARTEX

2014 Model, tandem axle spring ride, wr78 big barrel chain was new a year ago, some new beater teeth, single web drive

***Consigned *** Used Knight 2300 Reel Mixer! Left-hand 3 auger discharge, poly auger liners, 3 bar reels, top auger is at around 20% or so and bottom is around 30% or so, self-contained hydraulics, single axle, 540 pto, J-Star Model 5 scale, 260 cu.ft!

NEW! tandem axle, polly floor, vertical beaters

***NEW*** 27′ long elevator, swings side to side and up and down, hydraulic opening tub for easy access to screens & hammers, multi-function remote control system including throttle up/down, can choose Caterpillar or Cummins engines up to 800HP, chain driven tub with variable speed and reverse, hammers are reversible and have 4 hard surfaced corners, 14″ high capacity discharge auger, Industrial radiator, heavy duty air filter system with pre-cleaner.  Call today for more information on these top quality commercial grinders!

Self loading self propelled vertical mixer, 2400 hours 1 year old, very nice low use self loader!

2005 IH Paystar 500/2012 Spread All 20T Truck Spreader, truck has Cummins motor with 12,210 hrs. & 296,250 miles, Allison auto tranny, floater tires all around, spreader has good poly floor & sidewalls, good beaters with new gearbox, web chains are 1 1/2 yrs. old, good sprockets, slop gate, nice looking rig! Coming in!

**Consigned**Knight 3060 Pete TM, truck has roughly 123,000 miles, 320 model, PACCAR PX-9 engine, left hand flip-up discharge, stainless liners, 4 reel bars, dual augers.

**This unit is consigned 60-day warranty does not apply**

Both units were new in 2013 very nice local trade! Left hand discharge, Digi-star 2400V scale with remote, all stainless liners, top auger is 50% or so new bottom auger and reel wipers! Truck has full aluminum rims with good tires, truck is freshly serviced, has and automatic Allison 3500 RDS transmission, motor is a Paccar PX-8 300hp, very clean super sharp one owner unit, truck will have around 9000 hours with 53,000 miles. Ready to feed cattle!

new back tires, new feed lot augers, new flat conveyor,

SAC 3585 Truck Mount Vertical Mixer on a 2004 7600 IH truck , truck has a Cummins engine, Allison auto transmission, tandem axle, 20,440 hrs. 26,939 miles, front engine pto, mixer is a 2012, has stainless steel liners, augers are 80% with good knives, dogleg discharge, rear commodity door, SN:018225.

used one owner, 12 inch rolls and 54″ long, foldable auger discharge, hydraulic auger intake with a truck hopper, intake auger is brand new! new gearbox on the loading auger, rollers are in good shape!

NEW ! 1400t truck mount with stainless wall liners

Used Supreme 1400T mounted on a Mack Truck! 22,000 hours, new feedlot augers, stainless wall liners and conveyor is near new! Allison automatic transmission, Mack MP8 motor! New Batteries and battery shut off switch! Ready to go!

Automatic 3620 Roller Mill, good inlet auger, good discharge auger, newer gearbox and belts, small 1000 PTO, coming in!

***NEW***  Farm Aid 250 Truck Mount, left hand discharge, poly lined under auger and reel, weightronix 640XL scale head, extra clean sweep, drive on both ends of the spiral, SN: 2254.

2018 model, local trade, has the new style hammers, comes with 7 inch screen, folding conveyor, 16.5L – 16.1SL flotation tires, conveyor has rubber boot on the end, large 1000 cv pto, SN: 1118 0913 30. Nice unit!

Penta 5020 SD Vertical Mixer Wagon, 3′ right hand flip up discharge with backstop and mag tray, rubber extension, single axle with duals, Digi-Star 2500 scale head, new mild steel liners, new auger and knives!

new 36 foot long

Reel mixer, with scale, chain discharge, nice lower priced mixer! Clevis hitch, 540 PTO just serviced checked over and ready to work!

Farm Aid 560 Reel Mixer Wagon! Left hand discharge, 5 foot elevator, 2 new liners in the front, new paddle springs, rebuilt discharge! Small 1000 PTO, clevis hitch, weigh tronix 640 scale head! Just through the shop serviced and ready to go!

right hand discharge, 3 foot, auger is 50%

Ford Truck/Roto-Mix 600-16 Mixer! Consigned item. Automatic transmission, Full stainless steel liners. Bottom auger is getting thin Top auger is 30%. Single axle Ford 8000 truck 6000 roto mix box.

Used Knight 3030 Reel Feed Mixer! Coming Soon!

new feedlot augers and dogleg discharge, flip up magnetic tray

NEW! Welded on skid loader mounting plate and hydraulic hoses and flat face couplers are included, very nice way to bed your cattle with your skid loader!

Used Meyers 3750 Manure Spreader! Horizontal beaters, tandem axle with truck tires! New webs, freshly painted, new shields! Very sharp rebuilt spreader! Ready to go!

***NEW*** Herd-Boss 4825 Feeder, designed for feeding any type of wet/dry feed! 48″ discharge conveyor, able to load feed box with 8′ bucket, feeder is powered by 12 volt electric/hydraulic motor, 124 cubic ft. capacity! 17″ discharge chute, able to feed WDG, ear corn, silage, cracked/whole corn, cotton seed, gin trash, brewers grain, cubes etc!

Feeder dimensions: 102″ wide x 75″ deep x 44″ tall

***NEW*** Easy Rake PL16 with JRB Mounts! Make facing your silage pile easy and have less feed waste! SN: 2399202216

***NEW***  3 point hitch mount corn cracker, hydraulic adjustable spout, 60 hardened steel hammers, 1000 PTO, minimum tractor rating: 120 Engine HP, 6 adjustable shear plates to achieve the desired particle size, up to 2,300-2,500 bushels per hour can be processed with just a 165 PTO HP tractor,  you can increase the BPH by using larger tractors.

NEW Lankota Corn Cracker, pto driven hammer mill, 3 point hookup, blows product up to 50′ away.

Used Penta 1120-HD Vertical Feed Mixer! Dual flat discharge, tandem axle, super single tires, 2 speed gear box, clevis hitch, small 1000 PTO, Digi-Star scale head! New discharge chain, new augers and knives, just serviced and gone through in the shop and ready to go!

***NEW*** Supreme 600T Vertical Feed Mixer! Feedlot augers, small 1000 PTO, 8′ LH dogleg discharge, tail light kit, 10″ rubber extension, Digi-Star EZ2500V Scale Head, single axle 385x65R-22.5! Ready to go!

***Consigned*** Mack Straight 6 Silage Truck! Local owner consignment! Mack engine, 5 speed manual transmission with splitter, new batteries in the truck, tandem axle, 19.5′ box! Very strong running truck! End gate raises as the box is tipped up!

***NEW*** Easy Rake PL6 JRB Mounts! Make facing your silage pile easy and have less feed waste! SN:24402022

Used Supreme 900T Vertical Feed Mixer! Single axle with dual tires, 10″ rubber Ext., large 1000 CV PTO, new RH sliding dog leg discharge with magnet back stop! New stainless steel liners, feed lot augers are 60% or so, light kit, Digi-Star scale head, rear commodity door! Freshly repainted! Ready to go!

Used Farm Aid 680 Reel Feed Mixer! New LH 5′ chain elevator discharge, new leveling auger, new clean sweep, new poly liners, new paddles, good reel! Small 1000 PTO, Digi-Star scale head, freshly repainted! Ready to go!

***NEW*** Terry’s Repair 4 Tine Bale Spear! Two foot extension with back, Volvo mounts! Ready to go!

***NEW*** Whatcom 2200 Stall Bedder! Clevis hitch, 540 PTO, 16′ long with 6′ sidewalls! Single axle, front unload, reversible web chain, rear door for stock pilling! Capacity is ( 22 cu. yd). Ready to go!

Used Haybuster 2640 Bale Processor! Chain table, left hand discharge, new flails last year! Small 1000 PTO, clevis hitch, hydraulic controls! Ready to go!

NEW! cv pto, hydraulic bale lift,

***NEW*** Easy Rake PL20 Cat Fusion Mounts! Make facing your silage pile easy and have less feed waste! Ready to go! SN:2490-2023-20

Used Haybuster 2564 Top Discharge Bale Shredder! Good flails, has had some blower work, good average looking shredder! Small 1000 PTO, hyd. lift, all functions controlled by electronic control box! Ready to go!

Used Haybuster 2650 Bale Processor! Manual slug bars, implement tires, hyd. deflector, good bale lift arms, good chain table! Small 1000 PTO, new flails, freshly repainted, just gone through the shop! Ready to go!

Used Haybuster 2665 Bale Processor! One owner local trade! Flails are good, floatation tires, small 1000 CV PTO, light kit, Hyd. controls all functions! Ready to go!

Used Knight 3136 Reel Feed Mixer! Left hand slide tray discharge with magnets, good bottom auger, top auger is around 50% or so, newer wiper plastic, Digi-star 2810 scale head, single axle with 385 tires, freshly repainted! Very nice mixer! Ready to go!

Used Supreme 1200T Vertical Feed Mixer! Tandem axle with duals, large 1000 CV PTO, dual flat discharge, 80% cutting augers with hard welded edges and new knives, stainless liners, Digi-Star scale head!  Just through the shop and repainted! Ready to go!

Used Elmers Ravage Bale Processor! Floatation tires, new flails, very nice low use bale shredder, one owner local trade, customer switched his operation. Small 1000 PTO, hyd. controls! Ready to go!

Used Knight 2450 Reel Mixer Wagon! Slide tray discharge with magnets, top auger is 60%, bottom auger is 50%, good liners, small 1000 PTO, Weigh-Tronix scale head! Ready to go!

New Easy Rake PL6 Silage Defacer, 6′ long, 8′ wide, JRB416 mounts, SN:2101201806

Used NDE 2802 Vertical Mixer Wagon! Tandem walking axle with duals, rubber extension, very good liners, augers are 80% or so, 2-speed gearbox, front RH chain discharge, good knives! Rear light kit, good knives some are new, large 1000 CV PTO! Ready to go!

***Consigned*** 2015 Trinovation H36L Vertical Beater Manure Spreader! Walking tandem with 750 floatation tires, scale kit was bought new in 2018, also has GPS, large 1000 PTO, bull pull hitch, log chain style web! Sharp Spreader!

Used Fair 7825 Bale Processor! Floatation tires, electric over hydraulic controls, chain table is in good shape and the flails are new! New stainless steel liner on the door, small 1000 PTO! Ready to go!

Used 2021 MDS Pusher 12′! Bolt on Volvo mounts, top screen to get more material! Can push snow, silage, dirt and manure! Very Little use! Ready to go!

Used Kuhn Knight 3136 Reel Feed Mixer! New slide tray assembly 3 months ago, stainless auger liner by the door, bottom auger flighting is good at 80% or so! Top auger flights are 40% or so, good liners! Nice looking wagon! Ready to go!

Used NDE FS 1400 Vertical Feed Mixer! Very nice one owner trade! Dual side doors, tandem axel with super single tires, 10 inch rubber ext., good stainless steel liners new augers and knives! Light kit, bull pull hitch, large 1000 CV PTO, 2 speed gear box, Weigh-Tronix scale head! Ready to go!

Used Supreme 1200T Vertical Feed Mixer! Dual front side doors, rear commodity door, 10″ steel extension with 10″rubber ext.! Cutting augers are 60% or so with new hard welded edges, small 1000 PTO, clevis hitch, Digi-Star scale head! Ready to go!

Used Farm Aid 430 Reel Feed Mixer Wagon! LH 5′ chain discharge, single axles with 425 tires, Weigh-Tronix scale head, new poly liners, good leveling auger, new clean sweep, 540 PTO, good paddles! Ready to go!

Used Farm Aid 560 Reel Mixer Wagon! 5′ RH chain conveyor discharge, small 1000 PTO, leveling auger 50% or so, new poly liners, new clean sweep, new paddle rubbers and springs, Weigh-Tronix 640 XL scale head! Ready to go!

Used Kuhn Knight 4072 Botec 4-Auger Mixer Wagon! Left hand 3-auger discharge, tandem axle with duals, augers are 50% or so, good stainless steel liners, Digi-Star scale head with LED scoreboard remote read out!  Ready to go!

Used SAC 6070 Turbo Max Reel Mixer Wagon! Recently repainted, single axel, stainless steel liners under auger, new mild steel liners under reel, both augers are 80-90%, good 4-auger discharge, rear light kit, small 1000 PTO, Digi-Star scale head with RH remote, small 1000 PTO! Ready to go!

Used Farm Aid 430 Reel Feed Mixer! Discharge is a 5′ left hand conveyor elevator, new poly liners, new spider gears, clean sweep, leveling auger at 40-50% or so, Weigh-Tronix Scale head, 540 PTO! Ready to go!

Used Penta 7520 Vertical Feed Mixer! Completely rebuilt mixer! Single axle with duals, RH 3 foot discharge, rubber tub extension, light kit, rear commodity door, Digi-Star scale head with RH remote read out, small 1000 PTO! New augers and knives, new stainless steel wall liners, new stainless steel floor liners, discharge was rebuild with a new chain, freshly repainted! Ready to go!

Used Knight 3300 Reel Feed Mixer! New Reel liner, augers are around 70% or so, good auger liners, good 3 auger discharge! Weigh-Tronix scale head, 540 PTO! Nice straight wagon! Ready to go!

***NEW*** SAC M1670 Vertical Beater Manure Spreader! Tandem axel with floatation tires, spring ride suspension, single apron chain with 3/4″ grade 100 log chain, flared sides, large 1000 CV PTO, clevis hitch, road light kit with hydraulic light covers! Ready to go!

Used Kuhn Knight PS160 Vertical Beater Manure Spreader! Tandem axle with 435 tires, beavertail slop gate, rock guard, small 1000 PTO, tandem pintle web chains, light kit! Nice Knight spreader! Ready to go!

***NEW*** MDS 16′ Tire Gator! Lifts tires on your silage pile easily and safely, TG-160, 16′ long, pioneer hydraulic tips, pockets for pallet forks! Ready to go!

***NEW*** MDS 16′ Tire Gator! Lifts tires on your silage pile easily and safely, TG-160, 16′ long, pioneer hydraulic tips, pockets for pallet forks! Ready to go!

***NEW*** MDS 16′ Tire Gator! Lifts tires on your silage pile easily and safely, TG-160, 16′ long, pioneer hydraulic tips, pockets for pallet forks! Ready to go!

Used Supreme 900T Vertical Feed Mixer! Single axel with duals, new right hand dogleg discharge, good cutting augers with new knives and hard welded edges! Single owner local trade, large 1000 CV PTO, clevis hitch, Digi-Star EZ2810 scale head! Ready to go!

***NEW*** Herd-Boss 6135 Reel Feed Mixer! Single axel, left hand 3′ three auger discharge with magnet tip off, 3 bar spiral reel! Light kit, 540 CV PTO, Digi-Star EZ2500 scale head! Ready to go!

***NEW*** Herd-Boss 6150 Reel Feed Mixer! Slide tray discharge with magnets, single axel, spiral 3 bar reel, 5/8″ bottom auger flights 1/2″ on top auger! Drop side for easier loading, small 1000 CV PTO, Digi-Star EZ2500 scale head with scoreboard remote read out! Ready to go!

***NEW*** Herd-Boss 6150 Reel Feed Mixer! Slide tray discharge with magnets, single axel, spiral 3 bar reel, 5/8″ bottom auger flights 1/2″ on top auger! Drop side for easier loading, small 1000 CV PTO, Digi-Star EZ2500 scale head with scoreboard remote read out! Ready to go!

***NEW*** Herd-Boss 6175 Reel Feed Mixer! Slide tray discharge with magnets, tandem axel, small 1000 CV PTO, 3 bar spiral reel, 5/8″ bottom auger flights 1/2″ on top auger, full stainless steel liners! Drop side for easier loading, Digi-Star EZ2500 scale head with scoreboard remote read out! Ready to go!

Used Penta 9630 Vertical Feed Mixer! Flat dual discharge, tandem axle with super single tires, rear commodity door, light kit, 9″ rubber tub extension, augers are 60% or so with good knives, stainless steel over the baffles, 2 speed gear box, small 1000 PTO, Weigh-Tronix scale head! Ready to go!

Used Fair 7830TD Bale Processor! One year old unit in excellent shape! Flotation tires, electric control box controls all functions, top discharge, gearbox drive! Good flails, light kit, large 1000 CV  PTO! Ready to go!

***NEW*** Strobel catlle shade! Beat the heat with this 40′ x 40′ cattle shade!!  1600 square feet to service over 100 head of cattle!  7000lb concrete base provides stability in high winds; equipped with forklift pockets and recessed chain eyelets.  Manual rollup tarp easily stores on the frame for winter.  Sturdy tension straps ratchet down securely

**Listed price is for “will call” purchase and pickup transactions.**

Beat the heat with a 30′ x 30′ cattle shade!! Conveniently portable, 5,000 lb. cement base, removable tarp for winter months, 4 inch heavy duty straps that hold the tarp, covers approximately 65 head (1000 lbs.) **Listed price is for “will call” purchase and pickup transactions**

***NEW*** MohrShade Cattle Shade made by Bedrock Concrete Products! Beat the heat with this 34′ x 34′ cattle shade!! Shade stands 17 feet tall!  Withstands heavy wind and rainfall and can be put up and down with a simple crank!

Used Bale King 3100 Bale Shredder! Has big tires, RH discharge, good flails. small 1000 PTO, 3 hyd. controls, good bale lift arms! Nice shredder! Ready to go!

Used Supreme 900T Vertical Feed Mixer! Nice one owner trade! Right hand dogleg discharge, 2 hyd. remotes, good feedlot augers, single axle with duals! Point scale, large 1000 CV PTO, 10″ rubber tub extension! Ready to go!

Used Vermeer CPX9000 Bale Processor! Top discharge, chain table, electric over hydraulic controls, good flails, floatation tires, hydraulic bale lift! Small 1000 CV PTO,  nice one owner trade! Ready to go!

Used Spread-All TR20T Manure Spreader! Very nice spreader! Was completely rebuilt in the fall of 2022 including a new paint job! Tandem axel with good tires, good beaters and beater teeth, good sidewalls and floor, large 1000 PTO! Ready to go!

Used Meyers VB750 Manure Spreader! Very nice rebuild! Has new vertical beaters, new floor chains, tandem axle, beavertail slop gate, poly floor and new poly sidewalls, new shields,  freshly repainted! Clevis hitch, rock guard, large 1000 CV PTO! Ready to go!

Used Supreme 500S Vertical Feed Mixer! Nice single auger mixer! Tandem axel, right hand discharge, auger is 40% or so with new knives, new mild steel tub liners! Clevis hitch, 540 PTO, Digi-Star scale head! Ready to go!

Used Kuhn Knight 3036 Reel Mixer Wagon! Nice straight wagon! LH 3-auger discharge, good bottom augers at 50-60% or so, top auger has new flighting, stainless steel reel liner, stainless steel auger liner! Small 1000 PTO, Digi-Star scale head! Ready to go!

Used Spread-All TR22T Manure Spreader! Is a 2012 model! Has tandem axle with good tires, dual horizontal beaters with good teeth, good slop gate, and good poly floor and side walls! Small 1000 PTO, clevis hitch, light kit! Ready to go!

Used Supreme 700T Vertical Feed Mixer! Very nice one owner 2017 model! Single axle, right hand flip up discharge with magnet tip off, new cutting augers and knives, new stainless steel liners! Small 1000 CV PTO, 10′ rubber tub extension, Digi-Star scale head with remote readout! Ready to go!

Used Spread-All TR22T Manure Spreader! Tandem axel with good tires, new style horizontal beaters with the kick out option! Good poly all the way around, freshly repainted, clevis hitch, large 1000 PTO! Ready to go!

Used Penta 1720 Vertical Feed Mixer! Triple axle, triple auger, front door with dual flat discharge, rear commodity door, dual side doors, new augers and knives! Large 1000 CV PTO, two speed gear box, rubber tub extension, clevis hitch, Digi-Star scale head! Ready to go!

Used Roto-Mix 540-14 Reel Feed Mixer! Single axel, staggered rotor reel, very good augers, full stainless steel liners! Small 1000 PTO, Digi-Star scale head with right hand remote read out, slide tray discharge with magnets, freshly repainted! Ready to go!

Used Penta 1720 Vertical Feed Mixer! One owner trade! Triple axel with ok tires, triple screw, augers are ok, knives are ok. Dual side doors, rear commodity door, front RH corner door, back LH corner door. No scale head (But our parts department has plenty), large 1000 PTO, bull pull hitch, rubber tub extension, two speed gear box. Everything functions as it should but wagon will be sold as is. Ready to go!

Used Supreme 600T Vertical Feed Mixer! Very nice one owner local trade! Right hand dogleg discharge with magnet back stop, good feedlot augers with hard welded edges, good stainless steel tub liners, 3 hyd, controls! Small 1000 CV PTO, clevis hitch, Digi-Star scale head! Ready to go!

Used Supreme 900T Vertical Feed Mixer! Single axel with duals, right hand dog leg discharge, good cutting augers and knives! Digi-Star scale head, large 1000 CV PTO, clevis hitch, 10″ rubber tub extension! Ready to go!