Uncategorized

***NEW*** Penta 4030 vertical mixer wagon! Single axle, 540 CV PTO, 9″ rubber tub extension, 3′ right hand flip up conveyor, light kit, Digi-Star scale, 3/4″ hurricane auger! Ready to go!

***NEW*** Henke 1254 Roller Mill, trailer option, 1.35 O.D. differential drive for maximum processing, inlet auger with low profile hopper and hydraulic drive and lift, high moisture grain kit, 18′ by 18″ conveyor with 7.5′ discharge height.  This roller mill is set up for high moisture corn and is rated for 4500 bu/hour!

***NEW*** JBS 2448 E-Series Vertical Beater Manure Spreader! Bull pull, large 1000 PTO, light kit! Log chain single web, tandem axle, spring ride suspension! Ready to go!

***New*** JBS Vertimax 26′ Wide Body Low Rider Manure Spreader! SN:MSWP247-534. PTO Large 1000, equal angle hitch, HD 2′ Flared extensions and tandem axel with 750/60-30.5 tires, rear light kit, poly floor, dual log link web chain!

***NEW*** JBS 3048 Wide Body Vertical Beater Manure Spreader! Triple axel, log chain, bull pull hitch, large 1000 PTO, light kit! Ready to go!

***NEW*** 1015 Tub Grinder by Jones Manufacturing, Plus 1 controller, Remote, SN: 1015-21-0008

***NEW*** Mighty Giant 2015 Tub Grinder by Jones Manufacturing, 1/2″ mill disk/hammers, SN: 1094

***NEW*** Mighty Giant 2015 Tub Grinder by Jones Manufacturing, 1/2″ mill disk/hammers, SN: 1096

***NEW*** Mighty Giant 2015 Tub Grinder by Jones Manufacturing, 1/2″ mill disk/hammers. SN:1097

***NEW*** NDEco FS950DL Vertical Mixer Wagon! Tandem axel, small 1000 PTO, 2 speed gear box, long life carbide knives, RH 3′ flip up discharge with self leveling magnets, hard welded augers, rear light kit, 12″ rubber extension, Weigh-Tronix 640XL scale head! Ready to go!

***NEW*** Spread-All TR22T Horizontal Beater Manure Spreader! Tandem axle, small 1000 PTO! Dual apron chains, 8″ bottom beater! Ready to go!

***NEW*** Supreme 1200T Vertical Mixer Wagon! Dual front side door, rear commodity door, cutting augers, light kit, bull pull hitch, large 1000 CV PTO! Ready to go!

***NEW*** Supreme 900T Vertical Feed Mixer! Small 1000 PTO, bull pull hitch, rear light kit! Cutting auger with knives, rear commodity door with magnet tip off, 10′ RH dogleg discharge, Digi-Star EZ2500V scale head with a LH remote read out! Ready to go!

***NEW*** Supreme 900T Vertical Feed Mixer! Feedlot Augers, small 1000 PTO, 11R22.5 tires, single axle, 10′ LH dogleg discharge, light kit, 10″ rubber extension, Digi-star EZ2500V scale head! Ready to go!

2009 model 1170 Kuhn Knight manure spreader mounted on a 2003 Mack truck! Tires are new as of 2019, 10,024 hours and 214,327 miles on the truck. Mack engine AC-460P model CX613, Eaton Fuller 13-speed transmission model RTLO-16913A. Comes w/silage kit, healthy vertical beaters w/good teeth, new webs as of Oct. 2019. All around quality unit!

2005 IH Paystar 500/2012 Spread All 20T Truck Spreader, truck has Cummins motor with 12,210 hrs. & 296,250 miles, Allison auto tranny, floater tires all around, spreader has good poly floor & sidewalls, good beaters with new gearbox, web chains are 1 1/2 yrs. old, good sprockets, slop gate, nice looking rig! Coming in!

2005 Mighty Giant PTO Tub Grinder 2015, swing elevator, wireless remote, 6″ hay screen. This machine will grind any type of forage or grain for your livestock needs. Give Dan or Chad a call!

Used 2014 Jones Mighty Giant 2015 Tub Grinder! New hammers 1 month ago, newer discharge belt, +1 governor with wireless remote, rear light kit, tandem axle with good tires, good paint, nice condition! Ready to go!

Automatic 3620 Roller Mill, good inlet auger, good discharge auger, newer gearbox and belts, small 1000 PTO, coming in!

NEW!!  Hydraulic bale lift, 3 bale carry option, clevis hitch, 2 to 3 remote for 3 hydraulics

22 foot box with hoist, truck has caterpillar motor, tandem axle

used one owner, 12 inch rolls and 54″ long, foldable auger discharge, hydraulic auger intake with a truck hopper, intake auger is brand new! new gearbox on the loading auger, rollers are in good shape!

Davis Krimper-Kracker 300A Stationary Roller Mill, 10×20 rollers with electric drive. Will have new discharge auger and will be repainted. Coming in!

20 foot long, jrb couplers

4 wheel steer , water ring, ac/ radio, unloading belts

***NEW***  Farm Aid 250 Truck Mount, left hand discharge, poly lined under auger and reel, weightronix 640XL scale head, extra clean sweep, drive on both ends of the spiral, SN: 2254.

Used Farm Aid 560 Reel Feed Mixer! Coming in!

2011 truck , new box

Farm Aid 680/IH Truck

new 36 foot long

Ford Truck/Roto-Mix 600-16 Mixer! Consigned item. Automatic transmission, Full stainless steel liners. Bottom auger is getting thin Top auger is 30%. Single axle Ford 8000 truck 6000 roto mix box.

2018 model, local trade, has the new style hammers, comes with 7 inch screen, folding conveyor, 16.5L – 16.1SL flotation tires, conveyor has rubber boot on the end, large 1000 cv pto, SN: 1118 0913 30. Nice unit!

very low use, 3 years old very nice looking machine ! belt is in great shape and so are the hammers!

***NEW*** Henke 1254 Roller Mill, trailer option, 1.35 O.D. differential drive for maximum processing, inlet auger with low profile hopper and hydraulic drive and lift, high moisture grain kit, 18′ by 18″ conveyor with 7.5′ discharge height.  This roller mill is set up for high moisture corn and is rated for 4500 bu/hour.

2014 Model, tandem axle spring ride, wr78 big barrel chain was new a year ago, some new beater teeth, single web drive

NEW! tandem axle, polly floor, vertical beaters

48 ton spring suspension, 750 tires,

Both units were new in 2013 very nice local trade! Left hand discharge, Digi-star 2400V scale with remote, all stainless liners, top auger is 50% or so new bottom auger and reel wipers! Truck has full aluminum rims with good tires, truck is freshly serviced, has and automatic Allison 3500 RDS transmission, motor is a Paccar PX-8 300hp, very clean super sharp one owner unit, truck will have around 9000 hours with 53,000 miles. Ready to feed cattle!

**Consigned**Knight 3060 Pete TM, truck has roughly 123,000 miles, 320 model, PACCAR PX-9 engine, left hand flip-up discharge, stainless liners, 4 reel bars, dual augers.

**This unit is consigned 60-day warranty does not apply**

NEW!! Helix reel, 3 auger discharge, partial stainless steel

Used Knight Reel Augie 3030 Mixer Wagon! Nice straight mixer! Good 3 auger discharge, 540 PTO, Digi-star scale head! New auger liner by the door, new chain and sprocket in gear box! Serviced and ready to go!

***NEW***  3 point hitch mount corn cracker, hydraulic adjustable spout, 60 hardened steel hammers, 1000 PTO, minimum tractor rating: 120 Engine HP, 6 adjustable shear plates to achieve the desired particle size, up to 2,300-2,500 bushels per hour can be processed with just a 165 PTO HP tractor,  you can increase the BPH by using larger tractors.

2001 model tandem axle, nice truck, spreader is a 2009, vertical beater, webs are good, slop gate

gen 2 truck , repto, very nice looking truck

grapple fork mounted on a 3 yard bucket

***NEW*** Mighty Giant 2015 Tub Grinder, 1/2″ mill disk/hammers, SN: 2015-21-1087

right hand discharge, 3 foot, auger is 50%

NEW! 3 foot right hand discharge, 445 tires, 10 inch extension, big 1000 cv pto, 640 scale

NEW Lankota Corn Cracker, pto driven hammer mill, 3 point hookup, blows product up to 50′ away.

Penta 5020 SD Vertical Mixer Wagon, 3′ right hand flip up discharge with backstop and mag tray, rubber extension, single axle with duals, Digi-Star 2500 scale head, new mild steel liners, new auger and knives!

***NEW***  Penta 9830 Mixer Wagon, sliding dogleg discharge, 3/8″ tub wall, 6 point weighing system, rear door, 3/4″ auger, mounted on 2020 HX620 SBA 6×4, Cummins motor, Allison 4500 Transmission, Big Radiator.

Renn RMC 24 Roller Mill, good inlet auger on a truck hopper inlet, 12′ discharge auger, less than 50,000 bushels ran thru it, very nice condition!

Local trade! Truck mounted Roda 2200 vertical beater manure spreader, 13 speed truck, triple web chains. Truck has a Cat C12 motor with 505,000 miles and 22,500 hours! Plastic floor is in good shape! Beater teeth are in good shape as well! 900 BU capacity!

Truck and box are 2014 models, full stainless liners, staggered rotor mixer, augers are 30%, Digi-Star scales, single axle, Kenworth T370 with 9200 hours, PX-9 motor, SN: 410339411.  Excellent condition! Super sharp unit!

2013 Kenworth Truck with a 620 -16 box on it, full stainless box with new bottom auger

SAC 3585 Truck Mount Vertical Mixer on a 2004 7600 IH truck , truck has a Cummins engine, Allison auto transmission, tandem axle, 20,440 hrs. 26,939 miles, front engine pto, mixer is a 2012, has stainless steel liners, augers are 80% with good knives, dogleg discharge, rear commodity door, SN:018225.

Local owner consignment! SAC Turbo Max 6170 mounted on a 2005 IH 7400 truck! Detroit 466 motor, Allison automatic transmission, tandem duals! VIN:1H2WGAATX5J179138. The SAC mixer has, stainless steel reel liners, stainless steel auger liners, with a slide tray discharge! Augers are 50-60 percent! Ready to work!

***As with all consigned items the 60 day warranty does not apply***

Used Spread All TR22T on 1992 Peterbilt truck! Box has a silage kit, N14 Cummins motor, 13 speed, nice looking truck!

Used Supreme 1400T mounted on a Mack Truck! 22,000 hours, new feedlot augers, stainless wall liners and conveyor is near new! Allison automatic transmission, Mack MP8 motor! New Batteries and battery shut off switch! Ready to go!

new feedlot augers, hardwelded, dog leg discharge, magnetic flip up conveyor speed

new feedlot augers and dogleg discharge, flip up magnetic tray

NEW! Front Engine PTO drive, stainless steel wall liners, 8 foot sliding discharge

NEW ! 1400t truck mount with stainless wall liners

2018 Peterbilt 367 truck with a 1400T Supreme vertical mixer mounted on it, Stainless steel liners are in good shape, feedlot augers are around 40 percent, Front Engine Pto set up, truck has a cummins motor in it with a 4500 allison transmission with a drop box for slower speeds, truck is set up right and well maintained!

Peterbilt 367 with a 1400t box mounted on it

new back tires, new feed lot augers, new flat conveyor,

NEW UNIT!! cutting augers, flat sliding discharge, 10 inch rubber ext., ss wall liner

NEW! cutting augers hardwelded, 8 foot flat conveyor, camera system, floor liner, rear door, ss wall liner, 10 inch rubber ext.

Used Supreme 600T Vertical Feed Mixer! Sharp wagon! Single axel, new RH dogleg discharge, new feed lot augers, small 1000 CV PTO, clevis hitch! Good liners, freshly painted! Ready to go!

***NEW***SS liners, SS floor liner, dogleg conveyor with hydraulic flip up, hard welded feedlot augers, 10″ rubber extention, FEPTO, 4600 head, rear door, 2 speed for cleanout.

4 prong bale spear, skidloader mounts