spsl30t

Self-Loading Feeder Wagon

It’s been in northwest Iowa for a while,

You may have seen it at a few dairies,

Or in a parade.

What is it?

A self-loading feed wagon.

A self-loading feed wagon?

That’s right feed cattle all day and never leave one cab,

Never go looking for a pay loader,

Or start up two machines on a cold winter morning.

 

It’s a Supreme box and a Faresin chasis.

What is a Faresin?

They are made in Italy.

And are the only self-loader with 4 wheel drive and 4 wheel steer.

 

The box is 1200 cubic feet

And the motor is 240 hp.

It will load 6000 lbs of silage in a minute.

It will load hay bales,

Just shave off how much you need

And leave the rest of the bale until next feeding.

 

Call Post Equipment to set up a demo at your farm.

Our man Chad is experienced in operating the machine,

He can teach you or run it for you.

Let’s get started!

Call us today at 712-476-4500.

 

“Post Equipment Corp. & Metal Recycling had the Supreme Self Loader out on demo at Ocheda Dairy. They mixed a 25,000 lb. dairy ration load with 7 different ingredients in 11 minutes!”

 

Read More

Supreme Mixer Wagon Augers

Supreme Mixer Wagon Augers

Supreme mixer wagon augers can be one of two types – cutting augers or feedlot augers.

In the last sales blog we talked about the differences between vertical and reel mixers. This sales blog will describe the 2 types of Supreme mixer wagon augers – the cutting auger and the corn screw or feedlot auger.

    The Cutting Auger

  • The cutting auger typically has 5 to 7 knives per screw on a twin screw wagon.
  • You do not want to put more than seven knives per auger. More than seven knives would cause a bridge that would hold up the hay instead of letting the hay rise and fall like it is supposed to do.
  • Best uses for a cutting auger: 1-The cutting auger is best used for processing large round or large square bales of hay.
    2-Most dairies that process hay will use the cutting auger. If they are grinding their hay, some dairies will use the feed lot auger because it takes less horsepower and mixes faster.

    The Corn Screw or Feed Lot Auger

  • The two names of this auger confuse some people into thinking that supreme has three types of augers. However, Supreme has only two types of augers. Don’t let the interchangeable names of this auger confuse you!
  • The corn screw auger takes less horsepower and also mixes faster than the cutting auger.
  • This auger can be used to process hay, but it does not process hay as well as the cutting auger.
  • The feedlot auger has holes for knives but does not come from the factory with knives.
  • Best uses for the corn screw auger: 1-This is the auger of choice when using a high distillers or syrup ration. This auger does an awesome job of mixing the hard feedlot rations.
    2-All feedlots that have a Supreme mixer wagon are using the feedlot augers for the lower horsepower and the quicker mixing.

If you would like to demo a Supreme vertical mixer or would like to see one in action, call Dan at Post Equipment 712-476-4500. We have several Supreme mixers in stock – click here to see the Supreme mixers on our lot.

Read More

Supreme International product Specs

Supreme International Product Specs

(Click the Supreme model name to toggle the standard equipment of each model)

Standard Equipment
Supreme International 300

  • Patented Freestanding Vertical Mixing Auger
  • Manual Restrictor Plates
  • Heavy-Duty Planetary Drive
  • Replaceable Forage Cutting Blades (4)
  • 540 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 5/8″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Left or Right Hand Side Door With Drop Chute
  • 3 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • Removable Hitch Jack
  • Ultra Wear Kickerplate
  • (2) 12.5L-15, 12 Ply Rated Highway Service Tires

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 400

  • Patented Freestanding Vertical Cutting Auger
  • Manual Restrictor Plates
  • Heavy-Duty Planetary Drive
  • Replaceable Forage Cutting Blades (4)
  • 540 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 5/8″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Left or Right Hand Side Door With Drop Chute
  • 3 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • 2 19x45x17 Floatation Implement Tires
  • Removable Hitch Jack
  • Ultra Wear Kickerplate

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 500

  • Patented Freestanding Vertical Cutting Auger
  • Manual Restrictor Plates
  • Heavy-Duty, Two-Stage Planetary Drive
  • Replaceable Forage Cutting Blades (5)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Left or Right Hand Side Door With Drop Chute
  • 3 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • Solid truck axle with (4) 235x70x17.5 Truck Tires
  • Ultra Wear Kickerplate

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 600

  • Patented Freestanding Vertical Cutting Auger
  • Manual Restrictor Plates
  • Heavy-Duty, Two-Stage Planetary Drive
  • Replaceable Forage Cutting Blades (5)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Left or Right Hand Side Door With Drop Chute
  • Removable Heavy Duty Hitch Jack
  • 3 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • Solid truck axle with (4) 235x70x17.5 Truck Tires
  • Ultra Wear Kickerplate

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 500t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (8)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 8′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (2) 40×14.5×19 A/C Tires with 385×22.5 truck tire option

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 600t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 8′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (2) 40×14.5×19 A/C Tires

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 700t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 8′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (2) 40×14.5×19 A/C Tires with 385×22.5 truck tire option

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 800t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 8′ Flat Conveyor
  • Viewing Platform
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (4) 19x45x17 Floatation Implement Tires w/t Walking Beam and Tandem Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 900t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 3/4″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 8′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (4) 11R/22.5, 16 Ply Truck Tires with Budd Wheels and HD Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 1000t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 1″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 10′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (4) 11R/22.5, 16 Ply Truck Tires with Budd Wheels and HD Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 1200t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 1″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 10′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (4) 11R/22.5, 16 Ply Truck Tires with Budd Wheels and HD Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 1400t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 1″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 10′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (8) 275/70R 22.5 Tires with Walking Beam and Tandem Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Standard Equipment
Supreme International 1600t

  • Two Patented Freestanding Vertical Cutting Augers
  • Manual Restrictor Plates
  • (2) Heavy-Duty, Two-Stage Planetary Drives
  • Replaceable Forage Cutting Blades (10)
  • 540 or 1000 rpm PTO
  • Heavy-Duty Tubular Steel Frame
  • 1″ M/S Floor
  • 1/4″ AR200 Walls
  • 5/8″ AR200 Lower Auger Flighting
  • Front Center Door with 10′ Flat Conveyor
  • Ultra Wear Kicker Plates
  • Removable Heavy Duty Hitch Jack
  • 4 pt DG Stad 04 Plus Scale with Remote Port and 12 Recipe Programming Capability
  • 12 Volt Battery
  • (8) 275/70R 22.5 Tires with Walking Beam and Tandem Axle

Discharge Options

  • Corner Doors
  • Dogleg Conveyor
  • Flat Conveyor
  • Hydraulic Flip Up Conveyor

Optional Feedlot Auger Available

Compare these Supreme Mixers
Supreme
Model
Height w/10″ ext. Capacity w/10″ext. Augers
Model 300 pull type 108 in. 278 cuft. Single screw
Model 400 pull type 112 in. 378 cuft. Single screw
Model 500 pull type 115 in. 462 cuft. Single screw
Model 600 pull type 125 in. 537 cuft. Single screw
Model 500T pull type 109 in. 555 cuft. Twin screw
Model 600T pull type 115 in. 641 cuft. Twin screw
Model 700T pull type 123 in. 649 cuft. Twin screw
Model 800T pull type 116 in. 751 cuft. Twin screw
Model 900T pull type 127 in. 849 cuft. Twin screw
Model 1000T pull type 119 in. 906 cuft. Twin screw
Model 1200T pull type 131 in. 1072 cuft. Twin screw
Model 1400T pull type 152 in. 1312 cuft. Twin screw
Model 1600T pull type 152 in. 1480 cuft. Twin screw

 

Why is a Supreme the WORLDS BEST TMR?

Construction and durability:

  • Supreme uses AR200 Steel for the tub walls and lower auger flighting which gives you TWICE the life of normal carbon steel.
  • Supreme uses the largest available planetary drives in their TMR mixers. This guarantees the highest durability and reliability of your mixer
  • Every unit is equipped with a separate frame and undercarriage. This will guarantee a long and trouble free performance, no matter what the Terrain is where you are driving
  • Due to the high quality of workmanship all parts fit perfectly, are chemically washed, primed and painted with high gloss, high UV resistant DuPont paint. This paint was specially developed for Supreme.

Tub and Auger design:

  • The tub is designed with sloped walls so feed will slide easily from the top to the floor. Because of the slope there is enough space between the edge of the auger flighting and the tub wall which creates a fast moving volcanic action.
  • The auger has 4 patents, which gives it its superior and unsurpassed mixing performance. The 4 patents are a cut off section, a kicker plate, an up-turned top knife, and a cylindrical design.

Manufacturer’s Warranty – One year on complete mixer.

Special Offers and Financing – Post Equipment offers low, fixed-rate financing from Ag Direct.

Click Here to see all Supreme models for sale at Post Equipment

Read More

mixer-wagon-maintenance-quick guide

Quick Guide to Mixer Wagon Maintenance

Post Equipment has been buying, rebuilding, selling, and maintaining mixer wagons for a number of years. Here is a quick guide on how to maintain your farm equipment based on what we have seen in the field. The following notes are organized by vertical mixer wagons, reel feed wagons, and auger discharges. Call our knowledgable sales department for information you may need regarding your current or next feed mixer wagon.

Vertical Mixer Owner Notes

  • It takes at least a 450 cubic foot mixer to grind up a 5 x 6 bale of hay
  • It takes around 8 minutes to process a bale of alfalfa – longer for grass hay, cornstalks are similar to alfalfa
  • A single screw vertical mixer will unload faster than a twin screw because you have to wait for the feed to get from the back of the mixer to the front

VERTICAL MIXER MAINTENANCE:

Plow blade

  • The plow blade is the piece of metal on the back of the screw. On the new
    Pentas it is bolted on and it is welded on in most other wagons
  • Make sure the plow blade is not wore and is a ¼ “ from the side wall
  • Even though the plow blade looks like a small piece of metal (it is not along
    for the ride so to speak) it is a very important piece of the puzzle for fast
    and proper mixing action
  • If you need help with determining how worn your plow blade is or what
    action you should take, call Post Equipment and let us help you determine it

Mixer Knives

  • Check to make sure your knives are not dull if you are cutting a lot of hay or
    roughage (especially dairy)
  • If you are not worried about your knives and do not do a lot of cutting, check to
    make sure your bolt heads are not worn to the point where your knives
    will fall off. We’ve had this happen before and it can cause major damage.
  • If you are wondering how far to let you knives go before you replace them
    depending on your application give us a call.

Discharge

  • Make sure you have proper chain tension on the conveyor chain (3?of slack)
    and the hyd. motor drive chain (normal roller chain tight)

Planetaries

  • Make sure you have no leaks
  • Make sure the oil level is at the proper intervals
  • If you haven’t changed your oil in 2000 hours you should change it
  • 2 speed oil every 1000 hrs.

Reel Mixer Owner Notes

  • Red frame knights are older than yellow frame knights
  • A 2 spider reel is newer than a 3 spiral reel
  • A 2 spider reel takes a high roughage ration better than a 3 spider reel

REEL MIXER MAINTENANCE:

  • Take a look in your wagon and make sure your reel bars are not thin (especially where the bolt and the reel spring is). We have seen reel bars get so thin, break off, and then get stuck and cause auger damage.
  • Check your gear box for proper chain tension and their aren’t any tensioner springs broken. This is a common problem when we trade wagons in.
  • Make sure your bearings (set screws) are nice and tight on the augers and shafts.

Auger Discharge Owner Notes

  • Make sure your drive chains are tight
  • Make sure your augers are not worn
  • Make sure your auger bushings are not worn badly
  • Make sure your orbit motor is not leaking

You can read more about feed wagon maintenance in a recent post by Bud. Call Post Equipment if you need your mixer wagon repaired or replaced. 712-476-4500.

Read More